BREMBO Prime 09.A599.11 Brake disc for BMW 3 Series, X1 348x30mm, 5, internally vented

BREMBO Prime Brake Disc 09.A599.11 – High-quality ventilated front disc for BMW 3 Series and X1

The BREMBO Prime Brake Disc 09.A599.11 is an example of Italian engineering excellence – developed for drivers who value safety, precision and durability. Manufactured by BREMBO, a trusted OEM supplier, this high-performance ventilated brake disc ensures consistent braking force and efficient heat dissipation under demanding driving conditions. Technical specifications include an outer diameter of 348.0 mm, a disc thickness of 30.0 mm, and internally vented design for enhanced cooling.

The 09.A599.11 BREMBO brake disc features a ventilated design with 5 mounting holes and premium cast iron construction. It has a minimum thickness of 28.4 mm and comes with corrosion-resistant coating. Made of high-carbon cast iron, the brake disc is supplied with mounting hardware and is approved according to ECE R90, meeting European safety and quality standards for BMW vehicles.

Which vehicles are compatible with the BREMBO 09.A599.11?

For which BMW 3 Series models is the BREMBO Prime 09.A599.11 brake disc suitable?

This brake disc is compatible with many versions of the following BMW 3 Series models: BMW E90 3 Series Saloon (2004–2011), BMW E91 3 Series Touring (2004–2012), BMW E92 3 Series Coupe (2005–2013), and BMW E93 3 Series Convertible (2006–2013), provided the vehicle is equipped with the 348 mm front brake system.

For which BMW X1 vehicles is the BREMBO 09.A599.11 brake disc suitable?

The following BMW X1 vehicles can be fitted with this brake disc: BMW X1 E84 (2009–2015) with compatible brake system configurations.

Installation instructions for BREMBO Prime 09.A599.11

1. Replace brake discs in pairs to ensure balanced braking performance.

2. Remove the wheels and the caliper. Support the caliper to avoid tension on the brake hose.

3. Remove the old disc: loosen the retaining screw. If it is seized, gently tap it with a rubber mallet.

4. Thoroughly clean the hub from rust and dirt before installing the new disc.

5. Install the new disc and brake pads, then tighten the retaining screw and calliper bolts.

6. After installation, press the brake pedal several times and check the brake fluid level.

7. Bedding-in: perform 5–10 gentle braking cycles from 60 to 20 km/h to allow an even friction layer to form.

FAQ: BREMBO Prime Brake Disc 09.A599.11

Is the BREMBO Prime 09.A599.11 compatible with BMW E90 3 Series vehicles?

The Brembo 09.A599.11 brake disc is suitable for many BMW E90 3 Series models (2004–2012), provided the vehicle is equipped with the 348 mm front brake system. It delivers reliable and effective braking performance for compatible versions.

Can I use this brake disc on my BMW X1 E84?

Yes, the brake disc 09.A599.11 BREMBO Prime is compatible with BMW X1 E84 models (2009–2015) equipped with the appropriate brake system configuration.

Does this BREMBO disc fit BMW E92 and E93 models?

The Brembo Prime brake disc 09.A599.11 is suitable for many BMW E92 Coupe (2005–2013) and E93 Convertible (2006–2013) models, provided the vehicle is equipped with the 348 mm front brake system.

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 09.A599.11?

It is recommended to replace the brake pads together with new brake discs. This ensures optimal surface contact and consistent braking performance.

Is the BREMBO brake disc 09.A599.11 ventilated or solid?

This brake disc is internally ventilated. The internal cooling channel design improves heat dissipation and helps to prevent overheating during repeated heavy braking.

How should new brake discs be properly bedded in?

During the first 200 km, perform moderate braking and avoid full stops. This allows a uniform friction layer to develop and may help to extend the lifespan of both discs and pads.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 348 mm, the thickness is 30 mm, and the minimum thickness is 28.4 mm – suitable for BMW 3 Series and X1 vehicles equipped with the corresponding front brake system.

Is this brake disc suitable for vehicles with ABS?

The Brembo Prime 09.A599.11 brake disc is suitable for many vehicles equipped with ABS. It is designed to match the fit and function of the original parts.

Do I need special tools to install the BREMBO brake disc?

No, no special tools are required for installation. Standard Torx and socket wrenches are sufficient. However, a torque wrench is essential to ensure correct tightening of all bolts.

What are the advantages of the BREMBO brake disc 09.A599.11 compared to other models?

The BREMBO Prime series offers superior heat dissipation, reduced brake fade, and consistent performance under demanding conditions, making it ideal for both daily driving and spirited performance driving.