FORD Brake pads rear and front

FORD Brake pad set: find out more! How to choose, when to change , and how much they cost

Can I extend the service life of the brake pads on my Ford car?

Yes. The components will last longer if you avoid sudden starts and braking, regularly lubricate the caliper guides and pistons, and replace worn-out boots and cuffs. Do not rest your foot on the brake pedal while driving to avoid accidental contact with the brake pads.

What equipment will I need to replace the brake pads?

The following tools and equipment are normally required to install new brake components:

• A wheel wrench, torque wrench, and ratchet wrench
• A lifting device
• Wheel chocks
• A set of socket and TORX heads
• A pry bar
• A piston press tool
• Brake cleaner
• A metal brush
• Copper and anti-squeak lubricants

What types of brake pads are available for Ford vehicles?

• Standard components. Typically made from organic or low metal materials. These parts are similar to the OEM pads in terms of performance and are designed for moderate driving conditions and stress-free driving. Frequent hard braking can cause them to overheat, reducing the friction and increasing the braking distance. The sound and dust emission levels are determined by the amount of metal and graphite used to make the pads.
• Ceramic pads. They are silent and generate hardly any dust. They are also heat-resistant but still perform well in cold conditions. These components are more expensive. They are suitable for high-speed driving on public roads.
• High performance pads. They are usually semi-metallic. They are designed primarily for sports cars that are used on race tracks and serpentine roads, and for heavy-duty off-road vehicles. These components can withstand extremely high temperatures. However, they may be less effective at the start of the car journey when the braking system is still warming up.

Do the brake pads need to be replaced together with brake discs?

Not necessarily. You can continue using your brake discs as long as they meet the minimum thickness requirements and there are no cracks, dents, or rust marks on the surface.