The housing and the bracket of the rearview mirror secure the optical element and allow you to adjust its position.

Types of mirror housings, brackets

By purpose:

• for the interior mirror;
• for the side mirrors.

By the adjustment mechanism:

• with a hinge;
• with a lever;
• with a cable;
• electric.

Construction of mirror housings, brackets

The housing is a plastic frame, inside of which the optical element is placed. Moreover, auxiliary turn indicators or decorative LEDs may be integrated into it.

The bracket in most cases consists of two components connected by a joint. The fixed part is secured on the body or the windscreen and the mirror assembly (a housing with a reflective element) is attached to the movable part. Sometimes the joint connects one-piece bracket directly to the mirror housing.

The shape and size of the housing and the bracket depend on the mirror purpose (outside or interior), and the vehicle type and size.

Tips for operating the mirror housing and bracket

Service life of the components depends on the vehicle operation specifics and quality of materials. It is essential to detect failures and eliminate them promptly. The driver’s and passengers’ safety depends on mounting elements condition and mirror adjustment.

Do not neglect the recommendations on the car maintenance and buy only the highest quality parts to prevent damage to the parts.

Defects of the mirror housing and bracket

• mechanical damage (cracking, deformation);
• displacement from the mounting position;
• loosening of fasteners;
• jamming or wear of connections.

Signs of the mirror housing and bracket defects

• hindered adjustment of the mirror position;
• inability to fix the mirror in a desired position;
• visible cracks, shears on the housing;
• housing vibration.

Causes of the mirror housing and bracket defects

• low quality of materials the parts are made of;
• incorrect operation;
• Impact damage.

Repair and replacement of the mirror housing and bracket

Repair of these parts is not carried out. A damaged mirror housing or bracket should be replaced. Installation of a new part can be performed on your own. The procedure depends on the car model and the mirror itself. Sometimes the sequence is quite simple:

1. Remove the mirror housing from the clamp using a screwdriver, moving it towards the car front.
2. Remove the mirror housing from the bracket by pulling upwards.
3. Install a new housing.

Dismantling of the front door panels requires removal of the side mirrors in some car models. If you want to ensure that housing or bracket replacement is performed correctly, it is better to contact a service station.

AutoDoc professional assistance

Our online-shop offers a wide range of high-quality spare parts at the most reasonable prices. In AutoDoc you can buy a rear view mirror housing, bracket as well as other components for any car brand. We regularly offer discounts on spare parts, hold promotions for our customers. You will be delighted by the prices and ordering terms. Our shop offers fast delivery, as well as professional assistance of our technical support team.