• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #88-4732
£ 0,00
Your basket is empty

What is car vibration: common causes and possible solutions

Table of content

  1. Why is my car shaking: 7 most common reasons
  2. What to do if my car is shaking: possible solutions probles

A shaking, vibrating or shimmying car is a real pain in the neck for thousands of car drivers. It is one of the most boresome and common issues one might face. A great number of things can lie at the root of this problem: from the most trivial ones like bad road surface or worn-out tyres to quite a serious one such as engine malfunctions. So, let’s take a deeper look into the matter.

Why is my car shaking: 7 most common reasons

As it has been already mentioned above, old, worn-out and dry tyres can make your car shudder. Being the only part of the car that gets in touch with the road surface, they are the most common and obvious source of excessive vibration. Apart from that, they are exposed to a great number of negative impacts that make their lifespan significantly shorter. Flat tyres might be a source of shimmying themselves or lead to damaged wheels, the second possible reason why your car is shaking.

Worn tire

Unbalanced or damaged wheels may be also the case. As a matter of fact, wheels are not perfectly round. Metal walls can be slightly thicker or thinner in some places resulting in deviations from a perfect circular rotation. These deviations are called runout. The vibration caused by unbalanced wheels becomes clearly obvious especially when driving at high speeds. Even tiniest imperfections can make your car shake to say nothing of bent wheels.

Bent wheel rim

Another possible reason for a shimmy car is brake issues. If vibrations appear or become more intense when brakes are applied, you know where to look at. Usually, a warped brake rotor, or even rotors, can be a source of your headaches. When brakes are applied, brake pads and callipers are pressed against the rotor. If its surface is uneven due to wear or corrosion, the grip is uneven, thus, the car starts shaking.

However, not only tyres, wheels or rotors can become a source of vibration, axles can do as well. Collisions and mishaps do also happen, thus, causing your axles bent, for instance. If the vibration gets stronger upon acceleration, take a look at the bottom of your car. Be sure to check the CV joints and axle boots as well. Torn boots allow road dirt, dust getting in, thus, damaging the joints and causing vibration, as a result.

Rusted brake discs

Axle problems are not the only ones that make your car shake when accelerating. Bad engine mounts have the same symptoms. These spare parts are made of metal and rubber. Their main aim is to keep the engine in its place and not let it wobble. Rubber dampens the vibrations. However, if it gets torn or dried, it can’t perform its functions properly. Worn-out metal can also no longer provide a firm grip of the engine.

Unfortunately, a shake coming from under the bonnet might be a sign of some engine issues. The most common is the misfire. Which, in its turn, can be caused by a variety of things including poor quality fuel, bad spark plugs or clogged filters. As a rule, you can see a Check engine light on your dashboard.

Check engine light on dashboard

Sometimes, you may feel the vibration coming from your steering wheel. You might also notice a lack of responsiveness. In that case, you’d better check power steering and steering components, in general. Note the fact that vibration normally appears when you turn the steering wheel even if the car is in the park. Another sign that the problem is related to bad steering components is uneven wear of the tyres. It might be caused by worn-out tie rods, for instance.

What to do if my car is shaking: possible solutions probles

To begin with, it is necessary to detect the source of vibration. Visual inspection can be useful. Check your tyres. If they are worn out, roll unevenly or “out of round”, they have to be replaced. It is also worth checking the tyre pressure. If it is too low, use a tyre inflator to ensure they are at the correct pressure.

If your tyres are alright, let’s take a look at your wheels. Mud and dirt might get stuck on the wheels upsetting the balance. All you’ll have to do is wipe them off. If that doesn’t help, it is better to see a car mechanic. With the help of special equipment, they will do a check and will balance your wheels by attaching some wheel weights to them. Damaged and bent wheels in most cases have to be replaced.

Wheel balancing

Worn-out rotors are likely to be the cause when your car starts shaking only while braking. In case your rotors aren’t severely damaged, they can be cleaned and refinished. Otherwise, a replacement is the only way out. Brake calipers and pads have to be check as well. It is possible to refurbish worn-out spares if it is necessary. You should check that everything is lubricated correctly.

In case you suspect that your axles are behind the problem, examine them thoroughly paying special attention to the CV joints and boots. Make sure there are no traces of lubricant leaking out and all clamps are secured. If you notice any play in the joints or that your boots are torn, you should have your car checked at the shop. Perhaps, you’ll have to replace some of the components.

A shop check will be also necessary when vibration appears while turning and your steering wheel is shivering. Besides, if you notice that your power steering fluid is seeping out, it’s definitely time to pay a visit to your car mechanic.

Bad engine mounts are quite easy to diagnose. No vibration appears when your car is in neutral or park and it does when you press the accelerator pedal. Slight movement of the engine is okay; however, a big jolt is a sign that your engine mounts need replacement.

As for the vibration caused by misfire, you should make sure that the fuel you use of proper quality. Because of bad petrol, your fuel filter can get clogged and, as a result, the air-fuel ratio will be lean. You should clean your air filter as well. Misfire can also be caused by bad spark plugs. Be sure to replace them at the manufacturer's recommended intervals.

These are the most common reasons why your car might be shaking. Whatever the cause is, it is always a good idea to see an automotive service professional. Diagnosing car problems at their early stages will help you to avoid bigger car issues as well as bigger repair bills.

AUTODOC Bestsellers: parts at a good price

24306 BREMBO Prime P 50 067 Brake pad set prepared for wear warning indicator, with brake caliper screws, with accessories
Reviews - 27
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Lucas
  • Wear Warning Contact: prepared for wear warning indicator
  • Thickness [mm]: 21
  • Product line: Prime
  • Supplementary Article / Supplementary Info: with accessories
  • Height [mm]: 72
  • Width [mm]: 146
  • WVA Number: 24306
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • directional
  • BREMBO: Brake pad set
  • Item number: P 50 067
  • Our price: £ 29,48
  • Condition: New
Details
BREMBO Brake pad set prepared for wear warning indicator, with brake caliper screws, with accessories
Article number: P 50 067
£ 29,48
price incl. 20% VAT, excl. delivery costs
-10%
FEBI BILSTEIN 100401 Bellow Set, drive shaft transmission sided, Front Axle, Thermoplast
Reviews - 3
Parts Details
  • Fitting Position: transmission sided, Front Axle
  • Material: Thermoplast
  • Inner Diameter 2 [mm]: 27, 71
  • Weight [kg]: 0,259
  • Observe service information
  • Length [mm]: 107
  • FEBI BILSTEIN: Bellow Set, drive shaft
  • Item number: 100401
  • Condition: New
Details
FEBI BILSTEIN Bellow Set, drive shaft transmission sided, Front Axle, Thermoplast
Article number: 100401
compared to RRP £ 17,99

£ 16,06
price incl. 20% VAT, excl. delivery costs
23692 BREMBO P 85 069 Brake pad set prepared for wear warning indicator, without accessories, with counterweights
Reviews - 7
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Brembo
  • Wear Warning Contact: prepared for wear warning indicator
  • Thickness [mm]: 17
  • Supplementary Article / Supplementary Info: without accessories, with counterweights
  • Height [mm]: 99
  • Width [mm]: 190
  • WVA Number: 23692
  • BREMBO: Brake pad set
  • Item number: P 85 069
  • Our price: £ 92,16
  • Condition: New
Details
BREMBO Brake pad set prepared for wear warning indicator, without accessories, with counterweights
Article number: P 85 069
£ 92,16
price incl. 20% VAT, excl. delivery costs
25326 BREMBO P 50 094 Brake pad set prepared for wear warning indicator, with brake caliper screws, without accessories
Reviews - 28
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: TRW
  • Wear Warning Contact: prepared for wear warning indicator
  • Thickness [mm]: 19
  • Supplementary Article / Supplementary Info: without accessories
  • Height [mm]: 71
  • Width [mm]: 129
  • WVA Number: 25326
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • BREMBO: Brake pad set
  • Item number: P 50 094
  • Our price: £ 29,81
  • Condition: New
Details
BREMBO Brake pad set prepared for wear warning indicator, with brake caliper screws, without accessories
Article number: P 50 094
£ 29,81
price incl. 20% VAT, excl. delivery costs
AUTOFREN SEINSA D8413 Bellow Set, drive shaft 84 mm, transmission sided
Reviews - 7
Parts Details
  • Fitting Position: transmission sided
  • Height [mm]: 84
  • Inner Diameter 2 [mm]: 18, 59
  • AUTOFREN SEINSA: Bellow Set, drive shaft
  • Item number: D8413
  • Condition: New
Details
AUTOFREN SEINSA Bellow Set, drive shaft 84 mm, transmission sided
Article number: D8413
£ 12,07
price incl. 20% VAT, excl. delivery costs
-61%
LD3605 ATE Ceramic 13.0470-3605.2 Brake pad set prepared for wear warning indicator, excl. wear warning contact
Reviews - 34
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: ATE
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Thickness [mm]: 17,3
  • Product line: Ceramic
  • Height [mm]: 44,9
  • Width [mm]: 123,0
  • Test Mark: E1 90R-02A0258 / 0352
  • MAPP code available
  • Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2
  • Observe dimensions
  • Permissible up to vehicle capacity [kW]: 225
  • ATE: Brake pad set
  • Item number: 13.0470-3605.2
  • Our price: £ 49,22
  • Condition: New
Details
ATE Brake pad set prepared for wear warning indicator, excl. wear warning contact
Article number: 13.0470-3605.2
compared to RRP £ 127,75

£ 49,22
price incl. 20% VAT, excl. delivery costs
BP931 BOSCH 0 986 424 790 Brake pad set Low-Metallic, with acoustic wear warning, with anti-squeak plate
Reviews - 11
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Lucas-Girling
  • Wear Warning Contact: with acoustic wear warning
  • Thickness [mm]: 15,6
  • Material: Low-Metallic
  • Height [mm]: 37,4
  • Width [mm]: 95,8
  • WVA Number: 23816
  • Test Mark: ECE-R90
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
  • BOSCH: Brake pad set
  • Item number: 0 986 424 790
  • Our price: £ 17,25
  • Condition: New
Details
BOSCH Brake pad set Low-Metallic, with acoustic wear warning, with anti-squeak plate
Article number: 0 986 424 790
£ 17,25
price incl. 20% VAT, excl. delivery costs
-38%
FEBI BILSTEIN 43646 CV boot transmission sided, Front Axle Left, Front Axle Right, 93mm, Rubber
Reviews - 1
Parts Details
  • Length [mm]: 93
  • Material: Rubber
  • Fitting Position: transmission sided, Front Axle Left, Front Axle Right
  • Inner Diameter 2 [mm]: 22, 66
  • Weight [kg]: 0,083
  • FEBI BILSTEIN: CV boot
  • Item number: 43646
  • Condition: New
Details
FEBI BILSTEIN CV boot transmission sided, Front Axle Left, Front Axle Right, 93mm, Rubber
Article number: 43646
compared to RRP £ 14,99

£ 9,19
price incl. 20% VAT, excl. delivery costs
25029 BREMBO P 06 087 Brake pad set prepared for wear warning indicator, with anti-squeak plate, without accessories, with counterweights
Reviews - 39
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Brembo
  • Wear Warning Contact: prepared for wear warning indicator
  • Thickness [mm]: 17
  • Supplementary Article / Supplementary Info: without accessories, with counterweights
  • Height [mm]: 88
  • Width [mm]: 72
  • WVA Number: 25029
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
  • directional
  • BREMBO: Brake pad set
  • Item number: P 06 087
  • Our price: £ 68,37
  • Condition: New
Details
BREMBO Brake pad set prepared for wear warning indicator, with anti-squeak plate, without accessories, with counterweights
Article number: P 06 087
£ 68,37
price incl. 20% VAT, excl. delivery costs
-71%
23587 TRW DTEC COTEC GDB1550DTE Brake pad set incl. wear warning contact
Reviews - 46
Parts Details
  • Quantity Unit: Axle Set
  • Wear Warning Contact: incl. wear warning contact
  • Thickness [mm]: 20,3
  • Product line: DTEC COTEC
  • Number of wear indicators [per axle]: 1
  • Length [mm]: 156,4, 155,2
  • Height 1 [mm]: 71,4
  • Height 2 [mm]: 66
  • Test Mark: E9 90R-02A1062 / 0931
  • Manufacturer Restriction: ATE
  • Warning Contact Length [mm]: 155
  • Braking System: Low dust brake pads, also for perforated brake discs
  • Observe technical data
  • TRW: Brake pad set
  • Item number: GDB1550DTE
  • Our price: £ 40,11
  • Condition: New
Details
TRW Brake pad set incl. wear warning contact
Article number: GDB1550DTE
compared to RRP £ 139,40

£ 40,11
price incl. 20% VAT, excl. delivery costs
23130 BREMBO Low-Met P 85 041 Brake pad set excl. wear warning contact, with piston clip, without accessories
Reviews - 36
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Teves
  • Wear Warning Contact: excl. wear warning contact
  • Thickness [mm]: 20
  • Product line: Low-Met
  • Supplementary Article / Supplementary Info: without accessories
  • Height [mm]: 55
  • Width [mm]: 146
  • WVA Number: 23130, 23131
  • Supplementary Article / Supplementary Info Info 2: with piston clip
  • BREMBO: Brake pad set
  • Item number: P 85 041
  • Our price: £ 21,79
  • Condition: New
Details
BREMBO Brake pad set excl. wear warning contact, with piston clip, without accessories
Article number: P 85 041
£ 21,79
price incl. 20% VAT, excl. delivery costs
23584 BREMBO P 54 030 Brake pad set with acoustic wear warning, without accessories
Reviews - 34
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Akebono
  • Wear Warning Contact: with acoustic wear warning
  • Thickness [mm]: 16
  • Supplementary Article / Supplementary Info: without accessories
  • Number of wear indicators [per axle]: 2
  • Height [mm]: 55
  • Width [mm]: 145
  • WVA Number: 23584
  • BREMBO: Brake pad set
  • Item number: P 54 030
  • Our price: £ 25,92
  • Condition: New
Details
BREMBO Brake pad set with acoustic wear warning, without accessories
Article number: P 54 030
£ 25,92
price incl. 20% VAT, excl. delivery costs
-51%
MCV0443 MEYLE 314 498 0013 Joint kit, drive shaft Wheel Side, Rear Axle, with ABS ring
Reviews - 2
Parts Details
  • Fitting Position: Wheel Side, Rear Axle
  • Length [mm]: 126
  • External Toothing wheel side: 27
  • Internal Toothing wheel side: 25
  • Sealing Ring Diameter [mm]: 88
  • Joint Type: CV Joint
  • Thread Size: M24x1,5
  • Drive Shaft: with ABS ring
  • Surface: Powder coated
  • MEYLE: Joint kit, drive shaft
  • Item number: 314 498 0013
  • Our price: £ 57,21
  • Condition: New
Details
MEYLE Joint kit, drive shaft Wheel Side, Rear Axle, with ABS ring
Article number: 314 498 0013
compared to RRP £ 118,26

£ 57,21
price incl. 20% VAT, excl. delivery costs
-22%
FERODO RACING FCP4611H Brake pad set
Reviews - 8
Parts Details
  • Length [mm]: 114,5
  • Width 1 [mm]: 91,1
  • Thickness 1 [mm]: 18,1
  • Weight [kg]: 2,5
  • Version: Track day use
  • Packing Type: Box
  • FERODO RACING: Brake pad set
  • Item number: FCP4611H
  • Our price: £ 187,26
  • Condition: New
Details
FERODO RACING Brake pad set
Article number: FCP4611H
compared to RRP £ 242,32

£ 187,26
price incl. 20% VAT, free delivery
23587 BREMBO Prime P 85 075 Brake pad set incl. wear warning contact, with piston clip, without accessories
Reviews - 33
Parts Details
  • Quantity Unit: Axle Set
  • Brake System: Teves
  • Wear Warning Contact: incl. wear warning contact
  • Thickness [mm]: 20
  • Product line: Prime
  • Supplementary Article / Supplementary Info: without accessories
  • Number of wear indicators [per axle]: 1
  • Height 1 [mm]: 66
  • Height 2 [mm]: 71
  • Width 2 [mm]: 157
  • Width 1 [mm]: 155
  • WVA Number: 23587, 23588, 23589
  • Supplementary Article / Supplementary Info Info 2: with piston clip
  • Warning Contact Length [mm]: 145
  • BREMBO: Brake pad set
  • Item number: P 85 075
  • Our price: £ 28,16
  • Condition: New
Details
BREMBO Brake pad set incl. wear warning contact, with piston clip, without accessories
Article number: P 85 075
£ 28,16
price incl. 20% VAT, excl. delivery costs

Popular posts

Subscribe to our newsletters

To get our latest news and tips, please, enter your e-mail: