BEEPER RWEC100H Reversing camera 140°, kit, with monitor, with camera, IP67

The Beeper RWEC100H is the perfect system to equip your horse-drawn truck or van.

This reversing video system can be used as an electronic rear view mirror (rear view), to monitor any blind spot on a vehicle (external monitoring) or the horse inside the truck or van (internal monitoring).

It is a complete kit including a color camera certified IP67 (waterproof and dustproof), a screen with stand and suction cup support, and a cigarette lighter charger to connect your screen autonomously. The transmission by radio-frequency WIFI is particularly convenient for horse trailers where the wired connection is difficult to achieve.

Composition of the kit

The Beeper RWEC100H is a complete kit, to allow you to adapt it to your equestrian vehicle:

- 1 LCD screen 7'' wireless transmission and 1 screen support on stand
- 1 camera 18 LEDs IR wireless transmission
- 1 screen support with suction cup
- 1 cigarette lighter cable for screen

Main functions
Equipped with a 7'' screen, the RWEC100H allows you to easily monitor your horses, which guarantees security and peace of mind. Permanent installation of the screen or autonomous thanks to the cigar-lighter adapter, for more mobility, it's your choice. Moreover, the RWEC100H allows the connection of up to 4 cameras, which allows you to make it multi-task (surveillance, reversing, surveillance AND reversing).

In addition, each component of the Beeper RWEC100H has been designed for ease of use:

- Galvanized aluminum camera housing
- Adjustable camera supports hyper resistant
- IP67 waterproof rating
- 12V DC operating voltage
- Integrated microphone
- Infrared night vision
- Automatic adaptation to the ambient light
- Wireless connection by radio frequency
- 7 inch TFT LCD screen
- Possibility to install up to 4 cameras
- Adjustment of volume, brightness, contrast of the screen

WIFI transmission by radio frequency
The transmission by radio frequency WIFI is particularly convenient for horse trailers where the wired connection is difficult to achieve. There is no longer any risk of deterioration, wear and tear or waterproofing problems for cables and coils.

The WIFI transmission by radio-frequency allows a maximum range in free field of 30 m or a range of 10 to 15 m in an embedded configuration (passage of the signal through the structures).

Caution: WIFI RF transmission is disturbed or even blocked by metallic elements
- it is strongly advised not to install it if any metallic element is in the field between the screen and the camera
- this metallic element is charged in RF wave and disturbs the transmitted radio signal
- the product cannot be taken back if the installation does not respect these rules

Installation of the screen

Installation of the camera

Night vision
The camera in the Beeper RWEC100H kit is equipped with 18 infrared LEDs, which have the ability to detect the level of brightness, thus providing the best possible night vision.

Please note that the operation of the LEDs is not perceptible to the naked eye.

These LEDs are a real asset for night vision, however they can sometimes distort the real colors of surrounding objects or obstacles (eg: pink vegetation). However this constraint remains negligible compared to the overall performance of the product.

Multiple possible visions
- SURVEILLANCE = Monitoring of the horse in the van or truck (1 camera installed inside the vehicle).

- REVERSE = Visualization of the reversing area (1 camera installed outside the vehicle).

- REVERSE & MONITORING = Vision of the reversing zone & simultaneous monitoring of the horse inside the van or truck (1 camera inside the vehicle + 1 camera outside the vehicle).

Distance visualization templates

When used for rear vision, distance display template lines appear on the screen. These last ones make it possible to better evaluate the distances between the vehicle and the obstacle. These lines of gauge can be deactivated with the installation of the product if you wish it.

Functions of the screen

AV1- AV2 : Selection of camera 1 or 2 If you have installed 2 cameras or if another video source (DVD player, ...) is connected to the screen, this button allows you to switch the second video source.

Possible settings :

- rotation of the image from top to bottom possible
- inversion of the image right-left or mirror effect: useful if the camera is moved to the front This function is useful at the installation or in case of change of position of the screen or the camera

WARNING - VEHICLES THAT DO NOT ALLOW A CONSUMER TO BE CONNECTED TO THE BACK-UP LIGHT HARNESS
On some vehicles the +12 V reversing light is interfered with when the engine is running, which can disturb the proper functioning of the reversing camera kit. In other cases, this +12 V Backup Light does not allow any additional power consumption.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2
The BEEPER RWEC100H is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear instructions for use/assembly.