BEEPER RW038-P Reversing camera 170°, kit, with phone connectivity

Discover the Beeper ISIVU rear view camera kit
This kit has been designed to be installed easily and without any mistake. Composed of a micro-camera and a compact 4.3" screen, the Beeper ISIVU is universal. The camera is equipped with 4 infrared LEDs that guarantee you a good vision during your maneuvers of day but also night!
Reversing camera for all types of cars, reversing camera for all brands of campers and reversing camera for all sizes of trucks, the Beeper RW038-P is the reversing camera and screen kit you need!

Composition of the Beeper ISIVU kit
Compisition of the Beeper RW038-P rear view camera kit

The complete kit Beeper RW038-P is composed of :
- 1 screen 4.3" inches
- 1 rear view camera with 4 IR LEDs
- 1 power cable
- 1 video transmission cable

Dimensions of the elements of the rear view camera kit

Dimensions of the reversing video screen: 88 x 122 x 76 mm | Diag: 110 mm
Dimensions of the reversing camera: 31.2 x 23.8 x 27.5 mm | Drilling screw: 19 mm

Technical specifications of the rear view camera & screen kit Beeper ISIVU
- Power supply: DC +12V
- Consumption: - Night vision : 4 infrared LEDs
- Viewing angle: 170
- Waterproof rating: IP67 (Caution, do not clean with high pressure water jet)
- Screen size: 4.3" inches (=11cm)
- Video format: 4:3 & 16:9
- Screen resolution: 480 x 272 px
- PAL / NTSC system with automatic communication
- Alert limits superimposed on the image (selectable by loop)
- Humidity 95% max
- Operating temperature of rear view camera: -20°C / +70°C
- Operating temperature LCD screen: -15°C / +70°C
- Storage temperature for rear view camera: -40°C / +85°C
- Storage temperature of LCD screen: -20°C / +80°C

Installation of the rear view camera

- Horizontal installation of the rearview camera:

Remove the lining of your trunk to locate how to bring out the wire of the camera and allow the fixation of it. After choosing the best location for the camera, drill a hole with a diameter of 8 mm. We advise you to protect the support with an adhesive (type painter's tape) in order not to damage during the drilling.

- Vertical installation of the rear view camera:

Remove the plate pilot from its housing to locate the most suitable location. In the trunk, locate how to bring out the camera wire to allow the camera to be attached and connected to the vehicle's original wires as described on the previous pages. After choosing the best location for the camera, drill a hole with a diameter of 8 mm. Protect the support with an adhesive so that it is not damaged during drilling.

- Continued installation:

A light sanding may be necessary after drilling the hole so as not to damage the insulation of the camera cable. Remove the nut from the threaded rod of the camera, pass the camera wire (micro-connector) through this hole. Retrieve this wire from the trunk, insert the nut and screw it onto the threaded rod. The tightening must be strong enough to ensure the waterproofness and the good holding of the camera, be careful not to tighten too much what could break the threaded rod of the camera.

Selecting the loops of the rear view camera
lines of templates for the Beeper RW038P ISIVU display

- Distance Viewing Template = WHITE LOOP
White loop closed = Templates visible (original selection).
White loop cut off = templates not visible.

Inverted image on the Beeper RW038P ISIVU kit screen

- Inverted image up/down = GREEN LOOP
Green loop closed = Normal image (original selection).
Green loop off = Reverse image up/down.

Precaution and setting of the ISIVU Beeper kit
The screen has 3 buttons on the back, so you can adjust the brightness, contrast, saturation, mode (4:3, 16:9) and menu language (English, French, Chinese, Korean, Italian).
The cleaning of the screen should be done with a soft cloth slightly damp, be careful not to press on the LCD screen to avoid damaging it. The back-up camera lens should be cleaned with a soft, slightly damp cloth. Do not clean with a pressure washer.

Beeper ISIVU Backup Camera Kit Warranty
Beeper is committed to quality and guarantees this product for 3 years. In the event of a problem during installation, use or even maintenance, your product will be received by our after-sales service in France (Villefranche-sur-saône) and processed as soon as possible.

The ISIVU Beeper Kit is of course a complete kit ready for installation and use. It is composed of all the necessary cables and connections.