BEEPER XR5CAB XR5CAB Alarm System

The BEEPER XRAY XR5CAB car alarm is an alarm specialized in the protection of convertible. It is a simple and powerful system. The communication between the different elements is done by radio transmission RFID (Radio Frequency Identification) which allows an installation of a complete system with only 2 wires.

The Beeper XRAY XR5CAB is therefore 100% universal and 100% safe for your vehicle.

The BEEPER XRAY XR5CAB is the first automotive system that allows TOTAL COMPATIBILITY with multiplexed systems. The only connection necessary for its operation is the power supply of the siren which can be taken directly from the battery or from the passenger compartment.

Composition of the kit

Compatibility
Most European vehicles produced after 2001 have a multiplexed electrical network (CANBUS, VAN, etc.). This means that a single cable of the electrical network can contain multiple information thanks to a specific coding of the data in transit. The BEEPER XRAY XR5CAB; is a 100% universal kit, which means that it can be easily installed on all types of multiplexed vehicles as well as on all older vehicles.

Easy installation
Connecting the BEEPER XRAY XR5CAB car alarm is simple and takes only 30 minutes. Just connect the two wires of the siren to the battery of your vehicle and then connect the hyperfrequency sensor to a permanent + 12V and a ground (-).

Innovation
The technology developed for the Beeper XRAY XR5CAB is Radio Frequency IDentification (RFID), which allows for wireless transmission of data between the various elements of the system and automatic recognition between them. In the vicinity of the vehicle, the XRAY remote control will be automatically recognized by the central unit, so it is no longer necessary to press the button on the remote control.
The system will activate and deactivate itself within a radius of 10 m.

Main functions
- 100% compatible with multiplexed vehicles
- 2 RFID remote controls
- Microwave sensor
- Shock sensor remotely adjustable on 8 levels
- Ejectable current consumption sensor
- Coded radio siren (wireless) 118 dB
- Installation in 30 min.
- 100% universal

Composition
Siren and control unit 2 in 1
- Central allowing to connect the different modules of the alarm.
- Siren with a power of 118db
- 2 wires to connect:
red wire (+) 12V permanent battery
black wire (-) battery ground

2 remote controls
- one-way function
- automatic activation/deactivation function (hands-free access)
- 2 CR 2032 batteries (included) per remote control
- Alarm memory :
On deactivation, if the siren beeps 4 times, the system has recorded that the system was previously triggered.

XR5CAB sensor - auto alarm Microwave sensor
The microwave sensor is particularly suitable for protecting convertibles or open spaces. It allows to detect a movement in an open volume in a defined perimeter, for example: an arm entering the field will be detected. It can also be used for important closed volumes (commercial vehicle for example).
The sensor must be positioned in the center of the vehicle, if possible under the central console. The emission of the hyperfrequency signal is done in the form of a half-sphere from the sensor.
Note that it is possible to adjust the sensitivity of the sensor thanks to the potentiometer.

The XR5CAB alarm is of course a complete kit, delivered with all the elements necessary for the assembly, as well as a simple and clear instructions for use / assembly.