Renault 19 Convertible 1.8 16V Lambda sensor (137 hp Petrol F7P 700)
Recommended part replacement interval for your car for the part category Lambda sensor: every 100.000 km
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 400
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Voltage [V]: 12
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- TecDoc Engine Number: F7P 704
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0791
- Our price: £ 29,91
- Manufacturer: RIDEX
- EAN number: 4066423237115
- Condition: New
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0219P
- Our price: £ 32,72
- Manufacturer: RIDEX PLUS
- EAN number: 4066423686579
- Condition: New
-
- TecDoc Engine Number: F7P 704
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0197P
- Our price: £ 33,28
- Manufacturer: RIDEX PLUS
- EAN number: 4066423657265
- Condition: New
-
- TecDoc Engine Number: F7P 704
- Oxygen Sensor: Regulating Probe
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0224
- Our price: £ 35,70
- Manufacturer: RIDEX
- EAN number: 4059191378555
- Condition: New
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0219
- Our price: £ 36,30
- Manufacturer: RIDEX
- EAN number: 4059191378685
- Condition: New
price incl. 20% VAT
excl. delivery costs
-
- TecDoc Engine Number: F7P 704
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0197
- Our price: £ 36,85
- Manufacturer: RIDEX
- EAN number: 4059191378647
- Condition: New
price incl. 20% VAT
excl. delivery costs
-
- TecDoc Engine Number: F7P 704
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5-6e
- Oxygen Sensor: Heated
- Cable Length [mm]: 420
- Number of circuits: 3
- Number of connectors: 4
- Connector Shape: round
- Line insulation design: with thermal protection flexible insulating tubing
- Item number: 3922L0713
- Our price: £ 44,94
- Manufacturer: RIDEX
- EAN number: 4066016767456
- Condition: New
- Thread Size: M18x1,5
- Oxygen Sensor: Regulating Probe, Heated
- Cable Length [mm]: 280
- Conductor Number: 3
- Number of connectors: 3
- Connector Shape: oval
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0154
- Our price: £ 56,77
- Manufacturer: RIDEX
- EAN number: 4059191660315
- Condition: New
price incl. 20% VAT
excl. delivery costs
-
- TecDoc Engine Number: F7P 704
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140309
- Our price: £ 17,94
- Manufacturer: STARK
- EAN number: 4059191112340
- Condition: New
price incl. 20% VAT
excl. delivery costs
- Oxygen Sensor: Heated
- Item number: 461912223104
- Our price: £ 24,68
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063698823
- Condition: New

- Thread Size: M18x1,5
- Oxygen Sensor: Oxygen Sensor, Heated
- Cable Length [mm]: 1215
- Number of circuits: 3
- Spanner Size: 22
- Connector / Clamp: Connector may need adjustment
- Assy. / disassy. by qualified personnel required!
- Item number: 120-08-062
- Our price: £ 27,29
- Manufacturer: ABAKUS
- EAN number: 224657235318222353182
- Condition: New
- Oxygen Sensor: Regulating Probe, Oxygen Sensor
- Number of circuits: 3
- Weight [kg]: 0,08
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Item number: GOS-3000EX
- Our price: £ 30,20
- Manufacturer: ENERGY
- EAN number: 5908274107539
- Condition: New
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Item number: ESL-AU-007
- Our price: £ 31,63
- Manufacturer: NTY
- EAN number: 5902048081261
- Condition: New
- Oxygen Sensor: Heated
- Cable Length [mm]: 375
- Length [mm]: 375
- Number of circuits: 3
- Conductor Number: 3
- Resistor [Ohm]: 4,5
- Item number: 466016355088
- Our price: £ 31,66
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063903675
- Condition: New
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-003
- Item number: ESL-AU-003
- Our price: £ 31,79
- Manufacturer: NTY
- EAN number: 5902048081940
- Condition: New
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-AU-011
- Item number: ESL-AU-011
- Our price: £ 32,13
- Manufacturer: NTY
- EAN number: 5902048063830
- Condition: New
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, Rear, before catalytic converter, after catalytic converter
- Transmission Type: 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission
- Fabrication Number: ESL-SK-000
- Item number: ESL-SK-000
- Our price: £ 33,05
- Manufacturer: NTY
- EAN number: 5902048925923
- Condition: New

- Thread Size: M18X1.5mm
- Oxygen Sensor: Heated
- Fitting Position: Exhaust Manifold
- Cable Length [mm]: 145
- Overall Length [mm]: 287
- Length [mm]: 257
- Number of circuits: 3
- Conductor Number: 3
- Recommended change interval [km]: 80000
- Weight [kg]: 0,12
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: black
- Connector Shape: oval
- Net weight [kg]: 0,09
- Number of pins: 3
- Line insulation design: with silicone insulation
- Item number: LBS00480
- Our price: £ 33,07
- Manufacturer: WAGNER
- EAN number: 4060426534202
- Condition: New
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated, Thread pre-greased
- Number of pins: 4
- Fabrication Number: ESL-CH-003
- Item number: ESL-CH-003
- Our price: £ 33,45
- Manufacturer: NTY
- EAN number: 5902048023346
- Condition: New
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Oxygen Sensor, Thread pre-greased
- Fabrication Number: ESL-UV-001
- Item number: ESL-UV-001
- Our price: £ 34,91
- Manufacturer: NTY
- EAN number: 5902048897282
- Condition: New
- 1
- 2
- 3
- 4
- 5
Which lambda sensor is the best for the RENAULT 19 I Cabriolet (D53_) 1.8 16V (D53D)?
The best lambda sensors for the Renault 19 Convertible 1.8 16V (D53D) Petrol are from the following original brands:
- RIDEX
- RIDEX PLUS
- BOSCH
- RMS
- YATO
How much does a lambda sensor cost for the Renault 19 Convertible 1.8 16V (D53D)?
The price of a lambda sensor for the RENAULT 19 I Cabriolet (D53_) 1.8 16V ranges from £17.94 to £56.77.
What are the symptoms of a defective lambda sensor in a Renault Renault 19 Convertible D53_ 1.8 16V (D53D)?
A defective lambda sensor in a 19 I Cabriolet (D53_) 1.8 16V (D53D) Petrol can lead to the following failures:
- Increased fuel consumption
- Rough engine operation
- Excessive exhaust emissions
How can you check or replace the lambda sensor in a Renault 19 I Cabriolet (D53_) 1.8 16V Petrol Engine?
The lambda sensor in a Renault 19 I Cabriolet (D53_) 1.8 16V (D53D) can be checked by inspecting the connector and the multimeter values before and after the catalytic converter. If necessary, you can replace it yourself by following the correct instructions.
Which lambda sensor does the Renault 19 Convertible 1.8 16V (D53D) Petrol (Intake Manifold Injection/ Carburettor) 1991 - 1992 have?
Cable length [mm] | 145; 280; 375; 400; 420; 570; 750; 1215 |
Weight [kg] | 0.08; 0.12 |
Emission standard | Euro |
Exhaust system | before catalytic converter; for pre-catalytic converter |
Lambda sensor types | Diagnostic Probe; Heated; Oxygen Sensor; Regulating Probe; Thread pre-greased |
Length [mm] | 257; 375 |
Overall length [mm] | 287 |
Resistance | 2 - 9 |
Replacement interval | 90 000 - 130 000 km |