• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
£0.00
Your basket is empty

WALSER Perma Protect Bus M 30872 Car cover 185x470 cm, black/silver

Article number: 30872 EAN: 9001778308726
Submit a review
  • Consists of high-quality, specially developed hybrid foam.
  • Up to 7 mm thick layer for optimum hail absorption and puncture protection (depending on model).
  • Protection against hailstones up to approx. 09-14 mm in diameter at an impact speed of 70 km/h (depending on model).
  • Attached to the underside of the car using a snap fastener.
  • Simple installation.
Description
  • Cover type: full-size car covers, hail protection, waterproof
  • Material: Polyester, PP (Polypropylene)
  • Width [cm]: 185
  • Colour: black/silverblack / silver
  • Product line: WALSER Perma Protect Bus
  • Version: M
  • Height [cm]: 170
  • Length [cm]: 470
  • Quantity: 1
  • Thickness [mm]: 4
  • Item number: 30872
  • Our price: £185.49
  • Manufacturer: WALSER
  • Manufacturer's product category WALSER Car cover
  • EAN number: 9001778308726
  • Condition: New
Trade numbers: WALSER 30872
Free delivery on this item
-21%
compared to RRP £237.64

£185.49
£21.33 for 1 m²

price incl. 20% VAT

free delivery

Sold by AUTODOC

Add to wish list
Safety and product information

Walser

Hail protection cover

WALSER Car cover 30872
Park your car safely

Big, threatening clouds are gathering outside and your car is parked in the open. Then it starts to hail heavily and everyone hopes that not too much will happen to the car. However, you can watch the spectacle with peace of mind because you have found the best protection for your car: the Premium Hybrid SUV hail protection garage 30872.

WALSER 30872
Premium material quality for optimum hail protection

The hail protection tarpaulin is made from particularly high-quality hybrid foam and has been specially developed and protected. The foam consists of a layer approx. 7 mm thick, which ensures optimum hail absorption and puncture protection. The protective effect of the Premium Hybrid SUV 30872 hail protection tarpaulin was tested under controlled conditions by means of a simulated hail impact using a drop test. Steel balls with 3 different weights were dropped from different heights onto a bonnet covered with a hail protection tarpaulin. The effect of the impact of the steel balls was then visually checked by means of the dents formed on the bonnet. The test results showed that the Premium Hybrid SUV hail protection tarpaulin provides protection against hailstones up to a size of approx. 14 mm in diameter at an impact speed of 70 km/h. Overall, the hail protection tarpaulin has a thickness of approx. 8 mm. A paint-protecting fleece is attached to the inside and the outer layer is made of water-repellent material. The side material is also completely waterproof. There are 4 reflectors around the SUV and the red fluorescent edging strips increase the visibility of the vehicle.

Have you suffered hail damage?

You could have prevented it! Protect yourself effectively and protect your vehicle with a high-quality hail protection garage from Walser. Our product development is based on expertise and experience, so you can rely on the first-class quality of our hail protection covers.

Car protection cover 30872
WALSER 30872
Simple installation

The hail protection tarpaulin is available in four different sizes and is relatively easy to fit thanks to the elasticated seams. The hail protection tarpaulin is attached to the underside of the car using a snap fastening system at the front and rear. Only fit the hail protection tarpaulin to parked vehicles in non-public traffic areas. Remove the tarpaulin immediately after the storm, as it is not suitable for long-term use and becomes brittle due to long-term UV radiation. Please note that condensation and moisture can form under the cover if it rains heavily for a long time and there is a lot of moisture in the air and ground. Condensation can also form under the cover if temperatures fluctuate greatly. This happens regardless of whether the tarpaulin is waterproof or not. It is therefore all the more important to regularly remove the tarpaulin from the car, air it out and dry it.

Have you ever bought this product from AUTODOC: WALSER Car cover 30872?

Please rate this product
Add photos or videos to your review
Add files
0
Submit a review
0 stars 5 stars
How the star rating is calculated

Customer reviews and star ratings help our customers learn more about a product and decide whether it is worth buying. A complex algorithm is used to calculate the star rating, taking into consideration how long ago the review was made, whether the item was actually purchased in the AUTODOC online shop, and whether it was returned or not.

How we verify reviews

The tag "verified purchase" allows you to find reviews from customers who have actually purchased the item in question from the AUTODOC online shop. The "verified purchase" label applies to reviews of items purchased from the same account the reviews were submitted from. We still consider reviews without the "verified purchase" tag to be important, but we can't guarantee that the items described in such reviews were purchased in the AUTODOC online shop.

Questions and answers

0 Questions
Do you have questions about WALSER Car protection cover 30872?
If you have further questions on the product or require detailed information about the item, you can get in touch here and send us your specific question directly!
In order to submit your message, please fill in all the required fields.
Please enter your VIN so we can process your query faster

WALSER Perma Protect Bus M 30872: popular articles

Methods of Payment:
Pay quickly and easily with Visa WALSER Car cover 30872
MasterCard — payment methods for WALSER Car protection cover 30872
Protective car cover WALSER 30872 buy with AMEX — easily and without hassle online
Pay with paypal — Pay quickly and securely for WALSER Car cover 30872
Pay WALSER Vehicle cover EAN 9001778308726 with citi bank

Would you like to learn more about WALSER Protective car cover ?

Read the Car cover 30872 FAQ and customer reviews!

Need help? Contact us

Delivery Method:
Car protection cover 9001778308726 Reliable and secure delivery with EVRI

Each order from £140 value of goods, include free shipping within United Kingdom. If order total is less than £140, shipping cost will be £8.45

Your recently viewed items

KOLBENSCHMIDT 89179110 Cylinder Sleeve 128mm
Parts Details
  • Length [mm]: 265,2
  • Supplementary Article / Supplementary Info Info 2: wet cylinder liner
  • Diameter [mm]: 144
  • Cylinder Bore [mm]: 128
  • Thickness [mm]: 8
  • Flange Diameter [mm]: 156
  • Top Land Height [mm]: 1,3
  • Component Number: 63493
  • Machining: Finished
  • KOLBENSCHMIDT: Cylinder Sleeve
  • Item number: 89179110
  • Condition: New
Details
KOLBENSCHMIDT 89179110 Cylinder Sleeve 128mm
Article number: 89179110
£81.99
£327.96 / Price per 4 items
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

-39%
MINTEX MDB3332 Brake pad set with acoustic wear warning
Parts Details
  • Brake System: TRW
  • Wear Warning Contact: with acoustic wear warning
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 14,4
  • Quantity Unit: Axle Set
  • Number of wear indicators [per axle]: 2
  • Height [mm]: 43,8
  • Width [mm]: 95,6
  • WVA Number: 25651
  • Weight [kg]: 0,85
  • Packaging length [cm]: 12,5
  • Packaging width [cm]: 8,1
  • Packaging height [cm]: 8
  • MINTEX: Brake pad set
  • Item number: MDB3332
  • Our price: £41.49
  • Condition: New
Details
MINTEX 25411 Brake pad set with acoustic wear warning
Article number: MDB3332
compared to RRP £68.51

£41.49
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

-54%
AUTLOG AS4185 Crankshaft sensor
Parts Details
  • Length [mm]: 870
  • Weight [kg]: 0,11
  • AUTLOG: Crankshaft sensor
  • Item number: AS4185
  • Our price: £21.49
  • Condition: New
Details
AUTLOG AS4185 Crankshaft sensor
Article number: AS4185
compared to RRP £46.96

£21.49
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

SW-Stahl TBO/8-T60 Bit Screwdriver
Parts Details
  • Surface: Burnished
  • Spanner Size: T60
  • Length [mm]: 30
  • Material: Chrome Vanadium Steel
  • Weight [kg]: 0,017
  • Packaging: Poly bag
  • Bolt Head- / Nut Design: Female Torx, Torx
  • Drive side (profile): Male Hex
  • short version
  • Quality: Industrie / Profi
  • Hexagonal Drive Tang Size [mm (inch)]: 8 (5 / 16")
  • SW-Stahl: Bit Screwdriver
  • Item number: TBO/8-T60
  • Our price: £7.29
  • Condition: New
Details
SW-Stahl TBO/8-T60 Bit Screwdriver
Article number: TBO/8-T60
£7.29
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

-68%
MAPCO 47144 Brake discs and pads set Rear Axle, solid, with accessories, with brake caliper screws, with anti-squeak plate, prepared for wear warning indicator
Reviews - 4
Parts Details
  • Fitting Position: Rear Axle
  • Supplementary Article / Supplementary Info: with accessories
  • Diameter [mm]: 259
  • Brake Disc Type: solid
  • Number of Holes: 4
  • Brake System: Lucas / TRW
  • Brake Disc Thickness [mm]: 10
  • Wear Warning Contact: prepared for wear warning indicator
  • Bolt Hole Circle Ø [mm]: 100
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
  • Minimum thickness [mm]: 8,4
  • Required quantity: 1
  • Number of bolts / screws: 2
  • Quantity Unit: Set
  • MAPCO: Brake discs and pads set
  • Item number: 47144
  • Our price: £64.99
  • Condition: New
Details
MAPCO 47144 Brake discs and pads set Rear Axle, solid, with accessories, with brake caliper screws, with anti-squeak plate, prepared for wear warning indicator
Article number: 47144
compared to RRP £208.16

£64.99
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

VEMO V20-72-0216 Parking sensor Rear, blue
Parts Details
  • Fitting Position: Rear
  • Colour: blue
  • Colour Code: WC3Z
  • VEMO: Parking sensor
  • Item number: V20-72-0216
  • Condition: New
Details
VEMO VEMO-V20-72-0216 - 66 Parking sensor Rear, blue
Article number: V20-72-0216
£159.99
£319.98 / Price per 2 items
price incl. 20% VAT, free delivery

Sold by AUTODOC

MINTEX MFR578 Handbrake shoes without handbrake lever, with accessories
Parts Details
  • Brake System: Bendix
  • Width [mm]: 42
  • Supplementary Article / Supplementary Info: with accessories
  • Inner brake drum diameter [mm]: 172
  • Supplementary Article / Supplementary Info Info 2: without handbrake lever
  • Weight [kg]: 2,24
  • Packaging length [cm]: 19,8
  • Packaging width [cm]: 12,5
  • Packaging height [cm]: 8,2
  • MINTEX: Handbrake shoes
  • Item number: MFR578
  • Our price: £45.49
  • Condition: New
Details
MINTEX 98101 0667 Handbrake shoes without handbrake lever, with accessories
Article number: MFR578
£45.49
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

FTE 9250493 Hand brake cable Right Rear, Drum Brake
Parts Details
  • Fitting Position: Right Rear
  • Brake Type: Drum Brake
  • Weight [kg]: 0,64
  • Total Length [mm]: 1825
  • FTE: Hand brake cable
  • Item number: 9250493
  • Condition: New
Details
FTE FBS18025 Hand brake cable Right Rear, Drum Brake
Article number: 9250493
£14.99
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

DAKAtec 420017 Crankshaft sensor 2-pin connector, Passive sensor
Parts Details
  • Number of pins: 2
  • Sensor Type: Passive sensor
  • Weight [g]: 100
  • DAKAtec: Crankshaft sensor
  • Item number: 420017
  • Our price: £6.99
  • Condition: New
Details
DAKAtec 420017 Crankshaft sensor 2-pin connector, Passive sensor
Article number: 420017
£6.99
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

OMAC 4917204 Bonnet deflector
Parts Details
  • Fitting Position: Bonnet
  • Colour: black
  • Material: Acrylic
  • Vehicle type: MITSUBISHI ECLIPSE, CROSS
  • Construction Year from: 2017
  • OMAC: Bonnet deflector
  • Item number: 4917204
  • Our price: £156.49
  • Condition: New
Details
OMAC 4917204 Bonnet deflector
Article number: 4917204
£156.49
price incl. 20% VAT, free delivery

Sold by AUTODOC

MAPCO 13511 Starter motor 12V, 1,2kW, Number of Teeth: 8, links 38, Ø 77 mm
Parts Details
  • Rated Power [kW]: 1,2
  • Voltage [V]: 12
  • Number of Teeth: 8
  • Rotation Direction: Clockwise rotation
  • Number of mounting bores: 2
  • Flange Diameter [mm]: 77
  • Number of threaded holes: 2
  • Position / Degree: links 38
  • Used part return not required
  • MAPCO: Starter motor
  • Item number: 13511
  • Our price: £78.49
  • Condition: New
Details
MAPCO 13511 Starter motor 12V, 1,2kW, Number of Teeth: 8, links 38, Ø 77 mm
Article number: 13511
£78.49
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

COVIND 943/526 Holder, outside mirror Right
Parts Details
  • Fitting Position: Right
  • Specification: for 943 / 502
  • Left- / right-hand drive vehicles: for left-hand drive vehicles
  • Weight [kg]: 1,870
  • COVIND: Holder, outside mirror
  • Item number: 943/526
  • Our price: £124.99
  • Condition: New
Details
COVIND 943/526 Holder, outside mirror Right
Article number: 943/526
£124.99
price incl. 20% VAT, excl. delivery costs

Sold by AUTODOC

14 Days Returns Policy
14 Days Returns Policy
Safe Order 200 days for
Safe Order 200 days
Secure payments
Secure payments
Free Shipping
Free Shipping

Car cover for your car