BEEPER XR5VUL Alarm System

The Beeper XR5VUL universal alarm is a specialized alarm for the protection of commercial vehicles. It is a simple and efficient system. The communication between the different elements is done by radio transmission RFID (Radio Frequency Identification), which allows the installation of a complete system with only 2 wires.

The Beeper XR5VUL is the first automotive system that allows FULL COMPATIBILITY with multiplexed systems. The only connection required is the power supply for the siren, which can be taken directly from the battery or from the passenger compartment.

Composition of the kit


A = Central siren with integrated shock sensor

B = Infrasonic sensor

C = Microwave sensor

D = Magnetic sensor

E = Radio contactor

F = Hood switch

G = 2 one-way remote controls

Compatibility
Most European vehicles produced after 2001 integrate a multiplexed electrical network (CANBUS, VAN, etc...). This means that a single cable of the electrical network can contain multiple information thanks to a specific coding of the data in transit. The BEEPER XRAY XR5 is a 100% universal kit, which means that it can be easily installed on all types of multiplexed vehicles as well as on all older vehicles (pre-2001).

Easy installation
Connecting the BEEPER XRAY XR5 car alarm is simple and takes only 15 minutes. Just connect the two wires of the siren to the battery of your vehicle and place the air pressure sensor in the cigarette lighter.

Innovation
The technology developed for the Beeper XRAY XR5VUL is Radio Frequency IDentification (RFID) which allows for wireless transmission of data between the different elements of the system and automatic recognition between them. When the remote control is close to the vehicle, it will be automatically recognized by the central unit, so there is no need to press the button on the remote control. The system will activate and deactivate itself within a radius of 10 m.

Main functions
Siren and control panel 2 in 1
- Central unit with integrated 8-level adjustable shock sensor, allowing you to connect the various alarm modules.
- Siren of 118db
- 2 wires to connect :
red wire (+) 12V permanent battery
black wire (-) battery ground

2 remote controls
- One-way function
- Automatic activation/deactivation function (hands-free access)
- 2 CR 2032 batteries (included) per remote control
- Alarm memory :
On deactivation, if the siren beeps 4 times, the system has recorded that the system has previously been triggered.

Infrasonic sensor
It allows to detect the changes of air pressure in the vehicle. It is installed in the front cabin of your vehicle, in the cigarette lighter.

- Wireless connection between the central unit and the sensor
- Rechargeable on cigarette lighter
- 6 days autonomy
- Flashing of a red diode
- Possibility to activate and deactivate the air pressure sensor
- It is possible to adjust the sensitivity of the sensor
- This sensor can be present only once on the central unit

XR5CAB sensor alarm autpCyclic sensor
The microwave sensor is particularly suitable for protecting large open or closed volumes, such as the storage space of your utility. It allows to detect a movement in a defined perimeter, example: an arm entering the field will be detected.
The sensor must be positioned in the center of the rear cabin. The emission of the hyperfrequency signal is done in the form of a half-sphere from the sensor.
Note that it is possible to adjust the sensitivity of the sensor with the potentiometer.

Magnetic contactor
Wireless connection between the control unit and the sensor. This element is particularly useful to secure the sliding door and the rear doors of your commercial vehicle.

- 1 magnetic contactor supplied with the alarm
- The 2 parts are connected by a magnet that generates a detection as soon as they separate.
- A flat battery CR 2032 (supplied)
- The autonomy is about 24 to 36 months

Radio contact + cover
The radio contact can be used alone or in addition to the hood contact.

Radio contactor :
- The radio contactor in use only allows to protect the vehicle thanks to the ceiling light. The sensor is connected to the ignition of a ceiling light or to any electrical source allowing the detection of an opening and therefore allows the siren to be triggered.
Hood switch :
- The hood contactor is used exclusively in addition to the radio contact. It is used to protect the siren.
- These sensors can be present only once on the central unit.

The XR5VUL alarm is of course a complete kit, delivered with all the necessary elements for the assembly, as well as a simple and clear instructions for use/assembly.

Note :

For additional protection you can add additional sensors:

- XR5-PIR01 Infrared motion sensor