KRAFT 8200062 Window regulator for VW GOLF, JETTA Right Front

Published at autodoc.co.uk

This part was straight forward to fit, the old one was completely broken, but wasn't too difficult to figure out how it fitted, when fitting on the left side of the door, there is a window channel, this DOESN'T need removing, I though it was part of the regulator but I was wrong and ended up having to refit the channel. Please note the screws on the bracket that clamp the window to the regulator might be quite tight, and when there off the window will drop, so will either need to use some cardboard/paper folded several times, some rubber/plastic door wedges, or you might be able to find the right length wooden stick to prop the window, or a second person will be the best option. Whilst you detach the regulator from the window, and then refit the regulator and re-attach the window. When refitting you will need to place the regulator in the door and loosely put all the fixings in place, wind the regulator using the handle, to a place where you can see the fixing holes, lower the window to the same position, attach the window, tighten everything a little, and wind the window up/down, make sure you're happy with the position of the window, if not then adjust by loosening the fixings and moving things until your happy retighten, recheck then do a final tighten, and put everything back.