1.000.000 auto parts - find a suitable spare part for your car Example

0 Items
#
Your cart is empty
£ 0,00

Flaring, wing for your car

Order cheap Flaring, wing
Brand automobile Flaring, wing huge selection online
Flaring, wing for Top car maker
Flaring, wing in brand quality: Top manufacturers
  • Original AUTOMEGA Flaring, wing
  • Original BLIC Flaring, wing
  • Original DIEDERICHS Flaring, wing
  • Original DT Flaring, wing
  • Original EIBACH Flaring, wing
  • Original JOHNS Flaring, wing
  • JP GROUP
  • KLOKKERHOLM
  • PACOL
  • PRASCO
  • TRUCKTEC AUTOMOTIVE
  • VAN WEZEL
More
Top 8 Flaring, wing bestseller
The best-selling replacement parts from the Flaring, wing section. We have a large selection of spare parts from different brands for Flaring, wing and further low-price offers in our range of parts

Learn more about Flaring, wing - operation method, diagnosis, causes of faults and replacement intervals.

Abrasive wear is one of the most frequent defects of wheel arch flares. It is the rupture of the component material that prevents them from functioning as efficient protection for the car wheel arches.

How to detect abrasive wear of wheel arch flares

Inspection of the part will help detect the wheel arch flare defects. To gain access to the inner surface of the part you need to set the vehicle on a lift or raise it with a jack, and then remove the wheel. The following signs are indicative of the part abrasive wear:

  • surface roughness, specifically due to the presence of small scratches and cracks;
  • thinning;
  • deformation.

Besides, considerable wear of the flares can be detected by:

  • abnormal noise during driving;
  • considerable contamination and corrosion of the body components located under the car bottom.

Service life of car wheel arch flares has no strict limits and is determined by operation conditions and quality of components. Possibility of the flare repair depends on the material of which it is manufactured, and the wear degree. Damage to polyethylene or ABS plastic components can be removed by welding. Parts made of fiberglass are less subject to repair. In case of substantial wear the flare requires replacement, regardless of the material. For this purpose do the following:

  1. Provide access to the worn out part and carry out its demounting.
  2. Clean the wheel arch, in case it is corroded, treat it with anti-corrosion fluid.
  3. Attach a new part to the mounting seat. Fitting is recommended to perform with the wheel installed. It will make sure that the flare will not obstruct the vehicle at cornering.
  4. Install a new part. Double sided adhesive tape, self-tapping screws, clips, screws, staples can be used as fasteners according to the flare type.
Causes of the wheel arch flare abrasive wear

The major cause for the wheel arch flare wear is the impact of abrasive particles, including sand and small stones during the vehicle operation. Load on the parts increases when you  travel in cross-country conditions.

Wear of wheel arch flares can also be caused by:

  • low clearance;
  • incorrect installation of flares.
How to avoid abrasive wear of the wheel arch flares

It is important to give preference to high-quality parts to prevent premature wear of the components. Flares made of modified polyethylene are in the highest demand. They stand out by impact strength and resistance to hazardous environments. In case of low temperatures such car parts preserve elasticity and do not crack.

How to choose wheel arch flares

When selecting wheel arches flares it is important to follow instructions of the vehicle manufacturer, as well as make purchases in reputable shops such as AutoDoc. We offer auto parts of superior quality. Our support service specialists will help to figure out auto parts specifications and select parts from a large range which are suitable for your car repair!

Buy online at discount on special offers and promotions - TecDoc Inside

The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.

Service customers international

Service customers for Great Britain[email protected]Autodoc.co.uk - Hotline and customer service

© 2019 www.autodoc.co.uk: AUTODOC Online-Shop

New simplified site search will make it easier for you to find the right part. Search for spare parts.

Request type Example
Car Spare Parts Boot
Car Spare Parts + Car parts maker Boot RIDEX
Car Spare Parts + Automaker Boot BMW
Car Spare Parts + Number of article Boot 219G0295
Number of article 219G0385
Number of article + Car parts maker 219G0007 RIDEX
OEN 51242231663
OEN + Car parts maker 51248103180 RIDEX
loader Please, wait...