ATE 24.0124-0203.1 Brake disc 312,0x24,0mm, 5x120,0, Vented

ATE 24.0124-0203.1 Brake Disc – High-quality ventilated front disc for BMW vehicles

The ATE 24.0124-0203.1 Brake Disc is an example of German engineering excellence – developed for drivers who value safety, precision and durability. Manufactured by ATE, a trusted OEM supplier, this high-performance ventilated brake disc ensures consistent braking force and efficient heat dissipation under demanding driving conditions. Technical specifications include an outer diameter of 312.0 mm, a disc thickness of 24.0 mm, and optimal performance characteristics.

The ATE 24.0124-0203.1 Brake Disc features a ventilated design with 5 mounting holes and a 120.0 mm bolt circle diameter. Made of high-carbon cast iron, it comes with a corrosion-resistant coating. The brake disc is supplied with mounting screws and is approved according to ECE R90, meeting European safety and quality standards. This vented brake disc offers enhanced cooling performance for BMW's demanding braking requirements.

Which vehicles are compatible with the ATE 24.0124-0203.1?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which BMW 1 Series models is the ATE 24.0124-0203.1 Brake Disc suitable?

This brake disc is compatible with the following BMW 1 Series models: F20 (2010–2019) and F21 (2011–2019), provided the vehicle is equipped with the 312 mm front brake system. These compact BMW models benefit from the enhanced braking performance and heat dissipation of this ventilated disc design.

For which BMW 2 Series vehicles is the ATE 24.0124-0203.1 Brake Disc suitable?

The following BMW 2 Series vehicles can be fitted with this brake disc: F22 (2014–2021) and F23 (2014–2021), provided the vehicle is equipped with the 312 mm front brake system. The 312 mm diameter can deliver effective braking performance for these sporty compact models.

Which BMW 3 Series vehicles can be equipped with the ATE 24.0124-0203.1 Brake Disc?

This product fits the following BMW 3 Series models: E90 (2004–2011), E91 (2004–2012), E92 (2005–2013), E93 (2006–2013), F30 (2011–2019), F31 (2011–2019), and F34 (2012–...). These models represent the core of BMW's mid-size saloon and touring lineup.

Which BMW 4 Series vehicles are compatible with the ATE 24.0124-0203.1 Brake Disc?

The ATE 24.0124-0203.1 brake disc is suitable for many versions of the BMW 4 Series, including the F32 (2013–2020), F33 (2013–2020) and F36 (2014–2021), provided the vehicle is equipped with the 312 mm front brake system. These elegant coupes and convertibles can benefit from reliable braking performance during more spirited driving.

For which BMW X1 models is the ATE 24.0124-0203.1 Brake Disc suitable?

This brake disc is suitable for many versions of the BMW X1 E84 (2009–2015), provided the vehicle is equipped with the 312 mm front brake system. The compact SUV can benefit from the enhanced cooling capacity of this ventilated disc design for more confident braking performance.

Installation instructions for ATE 24.0124-0203.1

1. Replace brake discs in pairs to ensure balanced braking performance.
2. Remove the wheels and the caliper. Support the caliper to avoid tension on the brake hose.
3. Remove the old disc: loosen the retaining screw. If it is seized, gently tap it with a rubber mallet.
4. Thoroughly clean the hub of rust and dirt before installing the new disc.
5. Install the new disc and brake pads, then tighten the retaining screw and calliper bolts.
6. After installation, press the brake pedal several times and check the brake fluid level.
7. Bedding-in: perform 5–10 gentle braking cycles from 60 to 20 km/h to allow an even friction layer to form.

Do the brake pads need to be replaced at the same time as the ATE 24.0124-0203.1 Brake Disc?

It is recommended to replace the brake pads together with new brake discs. This ensures optimal surface contact and consistent braking performance for your BMW vehicle.

Is the ATE 24.0124-0203.1 Brake Disc ventilated or solid?

This brake disc is ventilated. The internal cooling channel design improves heat dissipation and helps to prevent overheating during repeated heavy braking, which is essential for BMW's performance-oriented driving characteristics.

How should new brake discs be properly bedded in?

During the first 200-300 km, perform moderate braking and avoid full stops. This allows a uniform friction layer to develop, helping to extend the lifespan of both discs and pads on your BMW.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 312.0 mm and thickness is 24.0 mm – suitable for BMW compact and mid-size vehicles with front brake systems requiring 5x120.0 bolt pattern.

Is this brake disc suitable for vehicles with ABS?

The ATE 24.0124-0203.1 brake disc is suitable for vehicles equipped with ABS, DSC and other BMW stability systems, provided the disc matches the required brake specifications. It is designed to offer proper fit and function when used on compatible BMW models.

Do I need special tools to install the ATE Brake Disc?

No special tools are required for installation. Standard Torx bits and socket spanners are sufficient. However, a torque wrench is essential to ensure the correct tightening of all bolts according to BMW specifications.

What are the advantages of the ATE 24.0124-0203.1 Brake Disc compared to other models?

The ATE 24.0124-0203.1 brake disc offers improved heat dissipation through its ventilated design, accurate 5×120.0 bolt pattern fitment for BMW vehicles, and ECE R90 certification, supporting OEM-level performance and safety standards.

Can the ATE 24.0124-0203.1 be used on both front and rear axles?

This brake disc is intended for front axle installation on compatible BMW models. Always verify the correct position and specifications before installation to ensure proper braking performance.

What is the minimum thickness specification for this brake disc?

The minimum thickness for the ATE 24.0124-0203.1 brake disc is 22.4 mm. This value should also be checked against your vehicle’s service manual. Once the disc reaches the minimum thickness, it should be replaced promptly to maintain safe braking performance.

How long do ATE brake discs typically last?

The lifespan of the ATE 24.0124-0203.1 brake disc can vary widely depending on driving style, road conditions and maintenance. With proper care and regular inspection, the discs may last many thousands of kilometres, but their wear level should always be checked as part of routine servicing.