SHW Performance ARX47416 Brake disc for Audi A6 C7 Avant Rear Axle, 356x22mm, internally vented, two-part brake disc, perforated/nubby

SHW Performance ARX47416 Brake Disc – High-quality perforated/nubby two-part rear disc for Audi A6 C7 Avant

The SHW Performance ARX47416 Brake Disc represents German precision engineering – designed for drivers who demand superior braking performance, enhanced cooling and exceptional durability. Manufactured by SHW Performance, a renowned specialist in high-performance brake systems, this internally vented two-part brake disc delivers outstanding heat dissipation and consistent braking force under demanding driving conditions. Technical specifications include an outer diameter of 356.0 mm, a disc thickness of 22.0 mm and advanced perforated/nubby surface treatment for optimal performance.

The ARX47416 SHW Performance Brake Disc features an innovative two-part design with internal ventilation channels and a distinctive perforated/nubby surface pattern. This specialised surface treatment enhances brake pad bite, improves heat transfer and reduces brake fade during intensive use. Made from high-carbon cast iron with precision machining, it meets OEM specifications and quality standards. The brake disc is specifically engineered for rear axle installation on the Audi A6 C7 Avant, ensuring perfect fit and optimal braking balance.

Which vehicles are compatible with the SHW Performance ARX47416 Brake Disc?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which Audi models is the SHW Performance ARX47416 Brake Disc suitable?

This brake disc is designed for the following Audi model: A6 C7 Avant (2011–2018) – provided the vehicle is equipped with the correct 356×22 mm rear brake system. Compatibility should always be confirmed using the VIN or PR brake code.

Installation instructions for SHW Performance ARX47416 Brake Disc

1. Replace brake discs in pairs to ensure balanced braking performance on the rear axle.
2. Remove the wheels and carefully support the vehicle on axle stands for safety.
3. Remove the brake calliper and support the calliper to prevent strain on the brake hose.
4. Do not separate the two-part disc hat and friction ring — install the disc as a complete unit.
5. Thoroughly clean the hub surface and remove all rust. Check for damage or excessive wear.
6. Install the new SHW Performance disc, ensuring proper seating and alignment.
7. Reinstall the brake calliper and new brake pads, torquing all bolts to manufacturer specifications.
8. Once installed, pump the brake pedal several times and check the brake fluid level.
9. Bedding-in: perform 8–12 progressive braking cycles from 80 to 30 km/h to properly condition the perforated surface.

Do the brake pads need to be replaced at the same time as the SHW Performance ARX47416 Brake Disc?

Yes, it is highly recommended to replace the brake pads when installing new brake discs. The perforated/nubby surface requires fresh pads to achieve optimal contact and performance.

Is the SHW Performance ARX47416 Brake Disc ventilated or solid?

This brake disc is internally vented with advanced cooling channels. The two-part design combined with internal ventilation provides superior heat dissipation compared to solid discs.

How should new brake discs be properly bedded in?

During the first 300 km, avoid hard braking and allow gradual heat cycling. The perforated/nubby surface requires careful bedding-in to develop the optimal friction layer.

What is the outer diameter and thickness of this brake disc?

The SHW Performance ARX47416 Brake Disc has an outer diameter of 356 mm and a thickness of 22 mm – engineered for the rear axle of the Audi A6 C7 Avant braking system.

Is this brake disc suitable for vehicles with ABS?

Yes, the ARX47416 SHW Performance Brake Disc is compatible with ABS-equipped vehicles, as long as the brake dimensions match the vehicle’s original specification.

Do I need special tools to install the SHW Performance ARX47416 Brake Disc?

Standard automotive tools are sufficient. The disc comes as a pre-assembled two-piece unit, so no special tools are required. However, careful handling is important to avoid damaging the friction surface, and checking run-out with a dial gauge is recommended.

What are the advantages of the SHW Performance ARX47416 Brake Disc compared to other models?

The perforated/nubby surface provides enhanced brake pad bite, improved heat transfer and reduced brake fade. The two-part design allows individual component replacement and superior cooling performance.

Can the ARX47416 Brake Disc be used for track driving?

Yes, the internally vented design with a perforated surface makes this disc suitable for spirited driving. However, for track use, proper bedding-in and the use of high-performance brake pads are recommended.

What is the difference between perforated and drilled brake discs?

The perforated/nubby surface of the SHW Performance ARX47416 provides controlled surface structuring that enhances initial bite while maintaining structural integrity — unlike fully drilled discs, which can be more prone to cracking due to their through-holes.

How long should the SHW Performance ARX47416 Brake Disc last?

With proper maintenance and driving habits, high-quality brake discs of this type typically last around 50,000–80,000 km, depending on vehicle use. SHW’s two-part construction is designed to reduce thermal stress and may contribute to longer overall service life, although individual component replacement depends on the specific model and is not guaranteed.