ZIMMERMANN SPORT COAT Z 100.3355.52 Brake disc Front Axle, 320x30mm, 6/5, 5x112, internally vented, Perforated

ZIMMERMANN SPORT COAT Z Brake Disc 100.3355.52 – High-performance perforated 320x30mm disc for Audi vehicles

The ZIMMERMANN SPORT COAT Z Brake Disc 100.3355.52 represents German precision engineering at its finest – designed for enthusiasts who demand superior braking performance and exceptional durability. Manufactured by ZIMMERMANN, a renowned OEM supplier with decades of expertise, this high-performance internally vented brake disc delivers outstanding stopping power and efficient heat dissipation under the most demanding driving conditions. Technical specifications include an outer diameter of 320.0 mm, a disc thickness of 30.0 mm, and advanced perforated design for enhanced cooling.

The ZIMMERMANN 100.3355.52 brake disc features an internally vented construction with 6 mounting holes on the front side and 5 on the rear, with a bolt circle diameter of 112 mm. The perforated SPORT COAT Z surface treatment provides superior heat management and consistent braking performance. Made from premium cast iron with specialized coating technology, this brake disc meets the highest European safety standards and is designed for both daily driving and spirited performance applications.

Which vehicles are compatible with the ZIMMERMANN 100.3355.52?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For additional safety, always verify the VIN, the OE number and, where applicable, the PR number (PR code).

For which Audi A4 models is the ZIMMERMANN SPORT COAT Z 100.3355.52 brake disc suitable?

This brake disc is compatible with the following Audi A4 models: A4 B8 Saloon (8K2) (2007–2015), A4 B8 Avant (8K5) (2008–2015), and A4 B8 Allroad (8KH) (2009–2016). These vehicles benefit from the enhanced cooling properties and consistent braking performance that the perforated design provides.

For which Audi A5 vehicles is the ZIMMERMANN 100.3355.52 brake disc suitable?

The following Audi A5 vehicles can be fitted with this brake disc: A5 B8 Coupe (8T3) (2007–2017), A5 B8 Sportback (8TA) (2009–2016), and A5 B8 Convertible (8F7) (2009–2016). The SPORT COAT Z technology ensures optimal performance for these premium coupes and convertibles.

Which Audi A6 and A7 vehicles can be equipped with the ZIMMERMANN SPORT COAT Z 100.3355.52 brake disc?

This product fits the following Audi A6 and A7 models: A6 C7 Saloon (4G2, 4GC) (2010–2018), A6 C7 Avant (4G5, 4GD) (2011–2018), and A7 Sportback (4GA, 4GF) (2010–2019). The larger 320mm diameter provides enhanced braking capacity for these executive-class vehicles.

Which Audi Q5 vehicles are compatible with the ZIMMERMANN 100.3355.52 brake disc?

The Brake disc 320x30mm ZIMMERMANN 100.3355.52 is suitable for the following Audi Q5 model: Q5 (8RB) (2008–2019). The internally vented and perforated design is particularly beneficial for SUV applications where consistent braking performance is crucial.

IMPORTANT: This 320x30mm disc is suitable for vehicles originally equipped with 320mm front discs. It is not suitable for vehicles equipped with smaller (e.g., 314mm) or larger (e.g., 345mm) factory discs. Always check your vehicle's PR-codes or existing disc diameter for proper fitment.

Installation instructions for ZIMMERMANN SPORT COAT Z 100.3355.52

1. Replace brake discs in pairs to ensure balanced braking performance across both sides of the vehicle.
2. Remove the wheels and carefully detach the brake caliper. Support the caliper properly to avoid strain on the brake hose.
3. Remove the old disc: loosen the retaining screw. If seized, apply penetrating oil and gently tap with a rubber mallet.
4. Thoroughly clean the hub surface, removing all rust, dirt, and debris before installing the new perforated disc.
5. Install the new ZIMMERMANN disc and brake pads, ensuring proper alignment. Tighten the retaining screw and caliper bolts to specified torque.
6. After installation, pump the brake pedal several times to seat the pads and check the brake fluid level.
7. Bedding-in: perform 8–12 moderate braking cycles from 80 to 30 km/h to properly condition the perforated surface.

Do the brake pads need to be replaced at the same time as the ZIMMERMANN brake disc 100.3355.52?

Yes, it is strongly recommended to replace brake pads together with new brake discs. This ensures optimal surface contact between the perforated disc and pads, maximizing braking performance and component longevity.

Is the ZIMMERMANN brake disc 100.3355.52 ventilated or solid?

This brake disc is internally vented with additional perforations. The combination of internal cooling channels and surface perforations provides exceptional heat dissipation, making it ideal for high-performance applications.

How should new brake discs be properly bedded in?

During the first 300 km, perform gradual braking and avoid emergency stops. The perforated surface requires proper bedding-in to develop an optimal friction layer, ensuring maximum performance and longevity.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 320 mm with a thickness of 30 mm – specifically designed for Audi vehicles requiring enhanced braking capacity. The larger diameter provides increased braking surface area.

Is this brake disc suitable for vehicles with ABS?

Yes, the ZIMMERMANN SPORT COAT Z 100.3355.52 is compatible with most ABS-equipped vehicles. The perforated design works seamlessly with electronic braking systems while providing enhanced performance.

Do I need special tools to install the ZIMMERMANN brake disc?

No special tools are required for installation. Standard automotive tools including Torx bits and socket wrenches are sufficient. A torque wrench is essential for proper bolt tightening specifications.

What are the advantages of the ZIMMERMANN brake disc 100.3355.52 compared to other models?

The SPORT COAT Z technology with perforations provides superior heat dissipation, reduced brake fade, and enhanced wet weather performance. The coating also offers improved corrosion resistance compared to standard brake discs.

Can I use this brake disc for track driving?

Yes, the internally vented, perforated design makes this brake disc suitable for spirited driving and light track use. The enhanced cooling properties help maintain consistent performance under demanding conditions.

What is the minimum thickness specification for this brake disc?

The minimum thickness for safe operation should not fall below the manufacturer's specification. Regular inspection is recommended to ensure the disc remains within safe operating parameters throughout its service life.

How long do ZIMMERMANN SPORT COAT Z brake discs typically last?

Service life depends on driving conditions and habits. Under normal conditions, these high-quality brake discs can last 60,000-80,000 km. The perforated design may extend service life by reducing heat buildup and brake fade.