ZIMMERMANN 100.3363.70 Brake disc for AUDI Q5, A8 Front Axle, 380x36mm, 6/5, 5x112, Vented, Perforated, floating brake disc, Aluminium Brake Disc Hub

ZIMMERMANN Brake Disc 100.3363.70 – Premium perforated front two-part floating brake disc for Audi Q5 and A8

The ZIMMERMANN 100.3363.70 brake disc represents the pinnacle of German brake technology – engineered for drivers who demand exceptional performance, safety and longevity. Manufactured by ZIMMERMANN, a renowned OEM supplier, this high-performance two-part floating brake disc delivers superior braking force and outstanding heat management under the most demanding driving conditions. Technical specifications include an outer diameter of 380.0 mm, a disc thickness of 36.0 mm and advanced perforated ventilated design.

The 100.3363.70 ZIMMERMANN brake disc features a sophisticated floating design with 6/5 mounting configuration and a bolt circle diameter of 112 mm. The innovative two-part construction combines a cast iron friction ring with an aluminium brake disc hub, providing optimal weight distribution and thermal expansion management. Made with premium materials and precision engineering, it comes with corrosion-resistant coating and is approved according to ECE R90, meeting all European safety and quality standards.

Which vehicles are compatible with the ZIMMERMANN 100.3363.70?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For additional safety, always verify the VIN, the OE number and, where applicable, the PR number (PR code).

For which Audi Q5 models is the ZIMMERMANN 100.3363.70 brake disc suitable?

This brake disc is compatible with the following Audi Q5 models: Q5 (8RB) (2008–2019) and Q5 (FYB) (2016–present). The floating brake disc design is specifically engineered to handle the increased braking demands of these premium SUV models.

For which Audi A8 vehicles is the ZIMMERMANN 100.3363.70 brake disc suitable?

The following Audi A8 vehicles can be fitted with this brake disc: A8 D4 (4H2, 4H8, 4HC, 4HL) (2009–2018). The two-part floating design with aluminium brake disc hub provides the precise braking performance required for this luxury sedan.

For guaranteed fitment, always verify the product dimensions, the axle position, and match the Original Equipment (OE) or PR-code against your vehicle's specific factory brake system.

Installation instructions for ZIMMERMANN 100.3363.70

1. Replace brake discs in pairs to ensure balanced braking performance across the axle.
2. Remove the wheels and carefully detach the brake caliper. Support the caliper properly to prevent strain on the brake hose.
3. Remove the old disc: loosen the retaining screws. For floating discs, pay attention to the specific mounting sequence and torque specifications.
4. Thoroughly clean the hub surface and inspect the aluminium brake disc hub for any signs of wear or damage.
5. Install the new floating brake disc, ensuring proper alignment of the two-part construction. Tighten mounting bolts to manufacturer specifications.
6. After installation, pump the brake pedal several times to seat the pads and check brake fluid level.
7. Bedding-in: perform 8–12 controlled braking cycles from 80 to 30 km/h to properly condition the perforated surface.

Is the ZIMMERMANN 100.3363.70 suitable for Audi Q5 with quattro all-wheel drive?

Yes, this floating brake disc is specifically designed for Audi Q5 models including quattro variants. The two-part construction handles the additional braking demands of all-wheel drive systems effectively.

Can the ZIMMERMANN 100.3363.70 be used on Audi A8 with air suspension?

Absolutely, the brake disc 100.3363.70 ZIMMERMANN is compatible with most Audi A8 D4 models equipped with air suspension. The floating design accommodates the dynamic load changes inherent in air suspension systems.

What are the benefits of the perforated design on this Audi brake disc?

The perforated ventilated design enhances heat dissipation, reduces brake fade, and helps maintain consistent braking performance during intensive use, making it ideal for both Q5 and A8 applications.

Do the brake pads need to be replaced at the same time as the ZIMMERMANN brake disc 100.3363.70?

Yes, it is highly recommended to replace brake pads together with new floating brake discs. This ensures optimal surface contact between the perforated disc and pads for maximum braking efficiency.

Is the ZIMMERMANN brake disc 100.3363.70 ventilated or solid?

This brake disc is ventilated and perforated. The advanced cooling design with internal ventilation channels and surface perforations provides exceptional heat management for high-performance applications.

How should new brake discs be properly bedded in?

During the first 300 km, avoid aggressive braking and allow gradual heat cycling. Perform controlled bedding-in procedures to develop an even friction layer on the perforated surface.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 380 mm with a thickness of 36 mm – engineered specifically for premium Audi vehicles requiring enhanced braking performance and heat capacity.

Is this brake disc suitable for vehicles with ABS?

Yes, the ZIMMERMANN 100.3363.70 floating brake disc is compatible with most ABS-equipped vehicles. The two-part design maintains precise tolerances required for proper ABS function.

Do I need special tools to install the ZIMMERMANN brake disc?

While standard tools are sufficient, a torque wrench is essential for proper installation of the two-part floating brake disc. Follow specific torque specifications for the aluminium brake disc hub mounting.

What are the advantages of the ZIMMERMANN brake disc 100.3363.70 compared to other models?

The floating two-part construction with aluminium brake disc hub offers superior thermal management, reduced weight, and enhanced durability compared to conventional solid discs, making it ideal for premium Audi applications.