ATE 24.0130-0213.2 Brake disc for BMW 3 Series, 1 Series 360,0x30,0mm, 5x120,0, two-part brake disc, perforated/vented

ATE 24.0130-0213.2 Brake Disc – High-performance two-part perforated disc for BMW 3 Series and 1 Series models

The ATE 24.0130-0213.2 Brake Disc represents the pinnacle of German brake technology – engineered for BMW enthusiasts who demand superior stopping power and thermal management. Manufactured by ATE, a premier OEM supplier, this high-performance two-part brake disc delivers exceptional braking force and outstanding heat dissipation under extreme driving conditions. Technical specifications include an outer diameter of 360.0 mm, a disc thickness of 30.0 mm, and an advanced perforated/vented design for optimal cooling.

The ATE 24.0130-0213.2 Brake Disc features a sophisticated two-part construction with 5 mounting holes and a bolt circle diameter of 120.0 mm. The perforated and ventilated design ensures maximum heat dissipation and reduced brake fade. Made of premium cast iron with corrosion-resistant coating, this brake disc meets all BMW specifications and is approved according to ECE R90, guaranteeing European safety and quality standards.

Which vehicles are compatible with the ATE 24.0130-0213.2?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which BMW 3 Series models is the ATE 24.0130-0213.2 Brake Disc suitable?

This brake disc is compatible with the following BMW 3 Series models: E90 M3 Saloon (2007–2011), E92 M3 Coupe (2007–2013), and E93 M3 Convertible (2008–2013).

For which BMW 1 Series vehicles is the ATE 24.0130-0213.2 Brake Disc suitable?

This brake disc is compatible with the BMW 1 Series M Coupe (E82, 2011–2012).

Installation instructions for ATE 24.0130-0213.2

1. Replace the brake discs in pairs to ensure balanced braking performance on both sides of the vehicle.
2. Remove the wheels and the calliper. Support the calliper to avoid tension on the brake hose.
3. Remove the old disc: loosen the retaining screw. If it is seized, gently tap it with a rubber mallet.
4. Thoroughly clean the hub surface to remove rust, dirt, and old grease before installing the new disc.
5. Install the new disc and brake pads, then tighten the retaining screw and calliper bolts.
6. Once installed, press the brake pedal several times and check whether the brake fluid level is sufficient.
7. Bedding-in: perform 5–10 gentle braking cycles from 60 to 20 km/h to create an even friction layer on the brake disc.

Do the brake pads need to be replaced at the same time as the ATE 24.0130-0213.2 Brake Disc?

Yes, it is recommended to replace the brake pads when installing new brake discs. This ensures optimal surface contact and consistent braking performance.

Is the ATE 24.0130-0213.2 Brake Disc ventilated or solid?

This brake disc is perforated and ventilated. The advanced two-part design with perforation and internal cooling channels provides superior heat dissipation and prevents overheating during intensive braking.

How should new brake discs be properly bedded in?

During the first 200-300 km, perform moderate braking and avoid full stops. This allows a uniform friction layer to develop, extending the lifespan of both discs and pads.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 360.0 mm with a thickness of 30.0 mm – specifically designed for high-performance BMW applications requiring superior braking capacity.

Is this brake disc suitable for vehicles with ABS?

Yes, the ATE 24.0130-0213.2 is compatible with vehicles equipped with ABS and DSC systems. The disc design and specifications meet all requirements for modern electronic braking systems.

Do I need special tools to install the ATE brake disc?

No special tools are required for installation. Standard socket wrenches and Torx bits are sufficient. However, a torque wrench is essential for ensuring the proper bolt tightening torque.

What are the advantages of the ATE 24.0130-0213.2 Brake Disc compared to other models?

The two-part perforated design offers superior heat dissipation, reduced weight, and improved brake modulation compared to solid discs. The perforations also help remove brake dust and water, ensuring consistent braking performance.

Can I use this brake disc for track driving?

Yes, the high-performance perforated and ventilated design makes this disc suitable for spirited road driving and occasional light track use, offering good resistance to brake fade under demanding conditions.

What is the minimum thickness specification for this brake disc?

For the ATE 24.0130-0213.2, the original thickness is 30.0 mm, and the manufacturer-specified minimum thickness is 28.4 mm. Once the disc wears to this limit, it should be replaced to maintain safe and reliable braking performance.

How long do these brake discs typically last?

The lifespan of brake discs depends largely on driving style and operating conditions. Under normal everyday use, they can be expected to last around 60,000–80,000 km. However, aggressive driving or frequent stop-start city traffic can shorten their service life considerably.