ATE 24.0130-0214.2 Brake disc for BMW 3 Series, 1 Series 360,0x30,0mm, 5x120,0, two-part brake disc, perforated/vented

ATE 24.0130-0214.2 Brake Disc – High-performance two-part perforated disc for BMW 3 Series and 1 Series models

The ATE 24.0130-0214.2 Brake Disc represents the pinnacle of German brake technology – engineered for BMW enthusiasts who demand superior performance, precision, and reliability. Manufactured by ATE, a leading OEM supplier, this high-performance two-part perforated brake disc delivers exceptional braking force and optimal heat dissipation in demanding driving conditions. Technical specifications include an outer diameter of 360.0 mm, a disc thickness of 30.0 mm, and advanced ventilated design for maximum cooling efficiency.

The ATE 430214 brake disc features a sophisticated two-part perforated design with 5 mounting holes and a bolt circle diameter of 120.0 mm. The perforated surface enhances heat dissipation and reduces brake fade during intensive use. Made of premium cast iron with anti-corrosion coating, it meets all BMW specifications. The brake disc is ECE R90 approved, ensuring compliance with European safety and quality standards for BMW 3 Series and 1 Series applications.

Which vehicles are compatible with the ATE 24.0130-0214.2?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which BMW 3 Series models is the ATE 24.0130-0214.2 Brake Disc suitable?

This brake disc is compatible with the following BMW 3 Series models: E90 Saloon (2007–2011), E92 Coupe (2007–2013), and E93 Convertible (2006–2013), provided the vehicle is equipped with the 360 mm brake system.

For which BMW 1 Series vehicles is the ATE 24.0130-0214.2 Brake Disc suitable?

This brake disc is designed for the BMW 1 Series M Coupe (E82, 2011–2012) fitted with the 360 mm front brake system.

Installation instructions for ATE 24.0130-0214.2

1. Replace brake discs in pairs to ensure balanced braking performance on both sides of the vehicle.
2. Remove the wheels and the calliper. Support the calliper to avoid tension on the brake hose.
3. Remove the old disc: loosen the retaining screw. If it is seized, gently tap it with a rubber mallet.
4. Thoroughly clean the hub of rust and dirt before installing the new disc.
5. Install the new disc and brake pads, then tighten the retaining screw and calliper bolts.
6. Once installed, press the brake pedal several times and check whether the brake fluid level is sufficient.
7. Bedding-in: perform 5–10 gentle braking cycles from 60 to 20 km/h to create an even friction layer on the brake disc.

Do the brake pads need to be replaced at the same time as the ATE 24.0130-0214.2 Brake Disc?

Yes, it is recommended to replace the brake pads when installing new brake discs. This ensures optimal surface contact and consistent braking performance, especially important for BMW's high-performance braking systems.

Is the ATE 24.0130-0214.2 Brake Disc ventilated or solid?

This brake disc is ventilated with a perforated design. The internal cooling channels combined with perforations provide superior heat dissipation and prevent overheating during aggressive driving typical for BMW performance vehicles.

How should new brake discs be properly bedded in?

During the first 200 km, perform moderate braking and avoid full stops. For BMW vehicles, gradually increase braking intensity to allow the perforated surface to develop a uniform friction layer.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 360 mm with a thickness of 30 mm, making this brake disc suitably sized for the BMW E90, E92, and E93 M3 models and the E82 1M Coupe equipped with the 360 mm front brake system.

Is this brake disc suitable for vehicles with ABS?

The ATE 24.0130-0214.2 Brake Disc is suitable for vehicles equipped with ABS, DSC and other BMW electronic stability systems, provided the disc matches the required brake system specifications. It is intended to offer reliable fitment when installed on compatible BMW models.

Do I need special tools to install the ATE brake disc?

No special tools are required for installation. Standard BMW-compatible tools, including Torx bits and socket wrenches are sufficient. A torque wrench is essential for ensuring the proper bolt-tightening torque.

What are the advantages of the ATE 24.0130-0214.2 Brake Disc compared to other models?

The two-part ventilated and perforated design helps improve heat dissipation and may support more stable braking performance under demanding conditions. The perforations aid in removing gases, dust and moisture from the braking surface, which can help reduce the risk of brake fade during more spirited driving.

Can this brake disc handle track day use on BMW E90 and E92?

The ventilated and perforated two-part design can cope with occasional track-day use on compatible BMW E90, E92 and E93 M3 models. For more demanding sessions, suitable high-temperature brake pads and proper temperature monitoring are recommended.

What is the minimum thickness specification for this brake disc?

The minimum thickness for this 360 mm brake disc is 28.4 mm. As service limits can vary depending on the specific vehicle application, it is always advisable to refer to your BMW service documentation to confirm the correct minimum thickness for your model.

Is the ATE 430214 brake disc compatible with aftermarket brake pads?

This brake disc can be used with appropriate brake pads — either OEM BMW pads or aftermarket pads, provided the pads are compatible in size and specifications. As with any performance disc, it is important to choose high-quality pads designed for ventilated/perforated rotors.