ATE 24.0130-0192.1 Brake disc for BMW 3 Series, X1 348,0x30,0mm, 5x120,0, Vented

ATE 24.0130-0192.1 Brake Disc – high-quality ventilated front disc for BMW 3 Series and X1

The ATE 24.0130-0192.1 Brake Disc is an example of German engineering excellence – developed for drivers who value safety, precision and durability. Manufactured by ATE, a trusted OEM supplier, this high-performance ventilated brake disc ensures consistent braking force and efficient heat dissipation under demanding driving conditions. Technical specifications include an outer diameter of 348.0 mm, a disc thickness of 30.0 mm and superior performance characteristics designed for BMW vehicles.

The ATE 430192 Brake Disc features a ventilated design with 5 mounting holes and a bolt circle diameter of 120.0 mm. Made of high-carbon cast iron, it comes with a corrosion-resistant coating. The brake disc is supplied with mounting screws and is approved according to ECE R90, meeting all European safety and quality standards. This premium brake disc delivers exceptional stopping power for BMW 3 Series and X1 models.

Which vehicles are compatible with the ATE 24.0130-0192.1?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which BMW models is the ATE 24.0130-0192.1 Brake Disc suitable?

This brake disc is compatible with the following BMW models: 3 Series E90 Saloon (2005–2011), 3 Series E91 Touring (2004–2012), 3 Series E92 Coupe (2006–2013), 3 Series E93 Convertible (2007–2013), X1 E84 (2009–2015).

Installation instructions for ATE 24.0130-0192.1

1. Replace brake discs in pairs to ensure balanced braking performance.
2. Remove the wheels and the calliper. Support the calliper to avoid tension on the brake hose.
3. Remove the old disc: loosen the retaining screw. If it is seized, gently tap it with a rubber mallet.
4. Thoroughly clean the hub of rust and dirt before installing the new disc.
5. Install the new disc and brake pads, then tighten the retaining screw and calliper bolts.
6. After installation, press the brake pedal several times and check the brake fluid level.
7. Bedding-in: perform 5–10 gentle braking cycles from 60 to 20 km/h to allow an even friction layer to form.

Do the brake pads need to be replaced at the same time as the ATE 24.0130-0192.1 Brake Disc?

It is recommended to replace the brake pads together with new brake discs. This ensures optimal surface contact and consistent braking performance for your BMW 3 Series or X1.

Is the ATE 24.0130-0192.1 Brake Disc ventilated or solid?

The ATE 24.0130-0192.1 is a ventilated brake disc. Its internal cooling channels help to dissipate heat more effectively and reduce the risk of overheating during repeated braking, supporting stable performance on compatible BMW models.

How should new brake discs be properly bedded in?

During the first 200-300 km, perform moderate braking and avoid full stops. This allows a uniform friction layer to develop, extending the lifespan of both discs and pads on your BMW vehicle.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 348.0 mm and thickness is 30.0 mm – specifically designed for BMW 3 Series and X1 models with front brake systems requiring larger disc dimensions.

Is this brake disc suitable for vehicles with ABS?

Yes, the brake disc ATE 24.0130-0192.1 is mainly compatible with vehicles equipped with ABS and DSC systems. The fit and function are identical to the original BMW parts.

Do I need special tools to install the ATE 24.0130-0192.1 Brake Disc?

No, no special tools are required for installation. Standard Torx and socket wrenches are sufficient. However, a torque wrench is essential to ensure correct tightening of all bolts according to BMW specifications.

What are the advantages of the ATE 24.0130-0192.1 Brake Disc compared to other models?

The 24.0130-0192.1 ATE brake disc offers superior heat dissipation with its ventilated design, premium cast iron construction, and ECE R90 certification, ensuring optimal performance for BMW's demanding braking requirements.

Can I install the ATE 430192 brake disc on both E90 and E91 BMW models?

Yes, this brake disc is compatible with both E90 Saloon and E91 Touring models, as well as E92 Coupe and E93 Convertible variants of the BMW 3 Series.

What is the bolt circle diameter for the ATE Brake Disc 348.0x30.0 mm?

The bolt circle diameter is 120.0 mm with 5 mounting holes. This bolt pattern is used on many versions of the BMW 3 Series (E90, E91, E92, E93) and the BMW X1 (E84), although compatibility should be confirmed for the specific model and brake system.

How often should brake discs be replaced on BMW vehicles?

Brake discs should typically be replaced every 60,000-80,000 km depending on driving conditions, though BMW vehicles with performance-oriented driving may require more frequent replacement due to higher thermal stress.