MERCEDES-BENZ GLA abs sensor
Where to buy MERCEDES-BENZ GLA abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce MERCEDES-BENZ GLA abs sensor replacement costs
The best selling ABS sensor replacement parts suitable for MERCEDES-BENZ GLA are available for your in original quality from our ABS wheel speed sensor catagory.
FEBI BILSTEIN 106704 ABS sensor
Front Axle Left, Front Axle Right, 920mm
Sold by AUTODOC
A.B.S. 31457 ABS sensor
Active sensor, 1060mm, 1145mm, 29mm, blue
Sold by AUTODOC
JP GROUP 1397105700 ABS sensor
Rear Axle, Active sensor, 1100mm, blue
Sold by AUTODOC
DELPHI SS21253-12B1 ABS sensor
Active sensor, 2-pin connector, 1057mm
Sold by AUTODOC
HELLA 6PU 012 679-651 ABS sensor
Rear Axle, Active sensor, 2-pin connector, 1134mm, 12V
Sold by AUTODOC
KAMOKA A2469057603 ABS sensor
Rear Axle Left, Rear Axle Right, 1056mm
Sold by AUTODOC
VEMO 1068005 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 1045mm, 12V
Sold by AUTODOC
JP GROUP 1397105500 ABS sensor
Front Axle Right, Front Axle Left, Active sensor, 985mm, black
Sold by AUTODOC
HELLA 6PU 358 216-041 ABS sensor
Rear Axle, Active sensor, 2-pin connector
Sold by AUTODOC
RIDEX PLUS 412W0391P ABS sensor
Front axle both sides, 2-pin connector, 910mm
Sold by AUTODOC
TRW GBS2805 ABS sensor
Active sensor, 46mm
Sold by AUTODOC
BOSCH ABS-SENSOR ABS sensor
Sold by AUTODOC
MAGNETI MARELLI MWSS136 ABS sensor
Front Axle, 2-pin connector
Sold by AUTODOC
SWAG 10 10 7466 ABS sensor
Rear Axle Left, Rear Axle Right, 1056mm
Sold by AUTODOC
ERA 560791A ABS sensor
Front Axle Left, Front Axle Right, Active sensor, 2-pin connector, 990mm
Sold by AUTODOC
Alfa e-Parts AF04996 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector, 106mm, black, black
Sold by AUTODOC
PREXAparts P301070 ABS sensor for MERCEDES-BENZ GLA
Front Axle
Sold by AUTODOC
TOPRAN 410 864 001 ABS sensor for MERCEDES-BENZ GLA
Rear Axle Left, Rear Axle Right, with seal ring, for vehicles with ABS, 2-pin connector, 53mm, oval
Sold by AUTODOC
DELPHI SS21327-12B1 ABS sensor for MERCEDES-BENZ GLA
Active sensor, 2-pin connector
Sold by AUTODOC
VEMO 1037886 ABS sensor for MERCEDES-BENZ GLA
Rear Axle Left, Rear Axle Right, with seal ring, 2-pin connector, oval
Sold by AUTODOC
ABS sensor MERCEDES-BENZ GLA in brand quality: Top Manufacturers
Sensor ABS for Top MERCEDES-BENZ GLA Models
AUTODOC tips and tricks to MERCEDES-BENZ GLA Wheel speed sensor
Wheel speed sensor suitable for Mercedes-Benz GLA: which brand is better?
According to our customers, the best spare parts in the product category Sensor ABS suitable for Mercedes GLA come from the following brands:
- FEBI BILSTEIN
- DELPHI
- WAGNER
- VEMO
- A.B.S.
ABS wheel speed sensor suitable for MB GLA: how much does this product cost?
The price of car parts within the category ABS sensor suitable for MERCEDES-BENZ GLA ranges from £11.00 to £72.00, depending on the manufacturer and product specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return MERCEDES-BENZ GLA abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
