Table of Contents
How to open Ford Transit bonnet and find the release
The Ford Transit is a versatile range of light commercial vehicles produced by the American car manufacturer Ford. The Transit range has a long history, with the first generation introduced in 1965. It has undergone several updates and redesigns to become one of the most popular and enduring vans in the global automotive market. In this article, we're going to focus on the Ford Transit bonnet because finding the release and opening the hood can be tricky, especially if you need to get more familiar with the layout of the vehicle.
How to open the Ford Transit bonnet/hood
To open the bonnet of your Ford Transit, first, locate the bonnet release lever. From the driver's seat, look on the driver's side, usually under the dashboard or slightly to the left of the driver's seat.
RIDEX Tyre pressure sensor (TPMS)
with groove, with valves
SCHRADER Tyre pressure sensor (TPMS)
with screw, with valves
NGK Spark plug
CNG/LPGM14 x 1,25, Spanner Size: 16 mm
BOSCH Bulb
12V 10W
SKF Bellow Set, drive shaft
146 mm, with clamps
The lever is often marked with a bonnet symbol or the word "bonnet". Pull the lever towards you to release the primary bonnet latch without opening it completely. Then exit the vehicle and go to the front of the vehicle. Locate the secondary latch in the centre of the front of the vehicle, just above the Ford emblem. Now use a bit of force to lift or push the latch (you may need to feel around to find its exact position). Lift the bonnet carefully when you have released the secondary latch. This is also a good time to check Ford Transit bonnet struts are in proper working order.
How to open Ford Transit Bonnet without a key
Opening the bonnet of a Ford Transit without a key can be a challenge as the bonnet latch is normally secured to prevent unauthorised access. If you find yourself without a key, consider the following steps. Firstly, check that your Ford Transit has a secondary unlocking device inside the vehicle. Look for a lever or button on the driver's side near the footwell or under the dashboard. If your vehicle doesn't have an internal release, you may have to use other methods. Some people use a small tool, such as a flathead screwdriver, to carefully manipulate the latch mechanism through the grille or from underneath the vehicle. However, attempting this without the correct tools or knowledge could result in damaging the vehicle. If you are in a position where your bonnet lock won’t open, it’s a good idea to check tutorials online as there are many tips and tricks that you can follow. Before attempting, make sure that you have the necessary Ford Transit spare parts and accessories you may need.
Top products related to this topic: