RIDEX 82B0349 Brake disc for BMW 1 Series, 2 Series Front Axle, 283,9x22mm, 5/6x120, Vented, Cast Iron

RIDEX Brake Disc 82B0349 – Premium ventilated front disc for BMW 1 Series and 2 Series

The RIDEX Brake Disc 82B0349 represents exceptional engineering quality designed for BMW enthusiasts who demand superior braking performance and reliability. Manufactured by RIDEX, a renowned aftermarket specialist, this high-performance ventilated brake disc delivers consistent stopping power and optimal heat management during intensive driving conditions. Technical specifications include an outer diameter of 283.9 mm, a disc thickness of 22.0 mm, and a bolt circle configuration of 5/6x120.

The 82B0349 RIDEX brake disc features a ventilated design with 5 mounting holes and a centering system optimized for BMW applications. Constructed from high-grade cast iron, it provides excellent durability and thermal stability. The brake disc is engineered to OEM specifications and meets European safety standards, ensuring perfect compatibility with BMW's advanced braking systems including ABS and DSC.

Which vehicles are compatible with the RIDEX 82B0349?

For an accurate compatibility check, please select your vehicle using the vehicle selector. For safety, always verify the VIN, OE number and/or PR code.

For which BMW 1 Series models is the RIDEX 82B0349 brake disc suitable?

This brake disc is compatible with the following BMW 1 Series models: BMW E87 (2004–2007) 116i, early 118i/118d (pre-facelift only), BMW E81 (2007–2011) 116i, 118i, 116d, 118d, BMW F20 (2011–2019) 114i and 116i (base variants only), and BMW F21 (2011–2019) 114i and 116i (base variants only).

For which BMW 2 Series vehicles is the RIDEX 82B0349 brake disc suitable?

The following BMW 2 Series vehicles can be fitted with this brake disc: BMW F22 Coupe (2014–2021) 218i base model only, and BMW F23 Convertible (2014–2021) 218i base model only.

Installation instructions for RIDEX 82B0349

1. Replace brake discs in pairs to ensure balanced braking performance across both front wheels.
2. Consult the vehicle’s service manual for the specific removal sequence and torque values.
3. Lift the vehicle securely and remove the front wheels. Remove the brake caliper and secure it to prevent strain on the brake line.
4. Remove the old disc: loosen the retaining screw using a Torx bit. If seized, apply penetrating oil and tap gently with a rubber mallet.
5. Clean the hub surface thoroughly, removing all rust, dirt and brake dust before installing the new RIDEX disc.
6. Install the new brake disc and replace brake pads simultaneously. Tighten the retaining screw and caliper bolts to BMW specifications.
7. After installation, pump the brake pedal several times to seat the pads and check brake fluid level in the reservoir.
8. Bedding-in procedure: perform 8–12 moderate braking cycles from 80 to 30 km/h to establish proper friction surface contact.

Is the RIDEX 82B0349 suitable for BMW E87 models with sport suspension?

Yes, the RIDEX 82B0349 brake disc is mainly compatible with BMW E87 models equipped with sport suspension packages. The disc maintains the same mounting specifications and performance characteristics as the original BMW parts.

Can the RIDEX 82B0349 be used on BMW F20 with M Performance brakes?

The RIDEX 82B0349 (284mm x 22mm) cannot be used on BMW F20 models with M Performance brakes.

Does the RIDEX 82B0349 fit BMW F22 models with different engine variants?

The RIDEX 82B0349 brake disc has 284mm (283.9mm) x 22mm specifications and only fits entry-level BMW F22 models, not all engine variants.

Do the brake pads need to be replaced at the same time as the RIDEX brake disc 82B0349?

Yes, it is strongly recommended to replace brake pads together with new brake discs. This ensures optimal surface contact, prevents uneven wear, and maintains consistent braking performance throughout the component lifespan.

Is the RIDEX brake disc 82B0349 ventilated or solid?

This brake disc is ventilated with internal cooling channels. The ventilated design significantly improves heat dissipation, preventing brake fade during repeated heavy braking and extending component life.

How should new brake discs be properly bedded in?

During the first 300 km, avoid aggressive braking and allow gradual heat cycling. Perform moderate stops from highway speeds, allowing cooling between applications. This develops an optimal friction layer for maximum performance.

What is the outer diameter and thickness of this brake disc?

The outer diameter measures 283.9 mm with a thickness of 22.0 mm. These dimensions are specifically engineered for BMW 1 Series and 2 Series front brake systems, ensuring perfect fitment and performance.

Is this brake disc suitable for vehicles with ABS?

Yes, the 82B0349 RIDEX brake disc is mainly compatible with ABS-equipped vehicles. The disc maintains the precise tolerances required for proper ABS sensor operation and system functionality.

Do I need special tools to install the RIDEX brake disc?

Standard automotive tools are sufficient for installation. You'll need Torx bits for retaining screws, socket wrenches, and a torque wrench for proper bolt tightening to BMW specifications.

What are the advantages of the RIDEX brake disc 82B0349 compared to other models?

The RIDEX 82B0349 offers superior cast iron construction, precision machining for smooth operation, optimized ventilation for heat management, and cost-effective performance matching OEM specifications while providing excellent value for BMW owners.