Car dashboard: symbols indicating faulty systems and mechanisms

New infographics explaining car dashboard lights. Learn more about the symbols that indicate malfunctions.

	The "Kinetic Dynamic Suspension System" indicator illuminates when there's a malfunction with the KDSS. This system is responsible for enhancing off-road performance and stability by adjusting the suspension settings. When this indicator lights up, it means there may be issues with the system's functionality that require inspection and potentially repair by a qualified technician.
	The "Tail Light" or "Stop Light" indicator alerts the driver when there is a malfunction in the vehicle's rear lights. These lights are crucial for signalling braking and indicating the vehicle's presence to other drivers on the road. When this indicator illuminates, it means that either the tail lights or the brake lights are not functioning properly, which can pose a safety hazard. Immediate attention is necessary to rectify the issue to ensure proper visibility and compliance with road traffic regulations.
	The "Engine Oil Pressure" indicator warns the driver when the oil pressure in the engine falls to a dangerously low level. Engine oil is essential for lubricating various moving parts in the engine, and insufficient oil pressure can lead to friction and damage. When this indicator lights up, it signals an urgent need to check the engine oil level and pressure. Continuing to operate the vehicle with low oil pressure can result in severe engine damage, so immediate action, such as adding oil or seeking professional assistance, is crucial to prevent further issues.
	The "Engine Power Decreased" indicator alerts the driver when there is a significant decrease in engine performance for various reasons. This reduction in power can stem from issues such as fuel system problems, sensor malfunctions, or engine misfires. When this indicator lights up, it indicates that the vehicle's engine is not operating at its optimal capacity, which can lead to reduced acceleration and overall performance. Prompt diagnosis and repair of the underlying issue is necessary to restore the engine's power and ensure safe and efficient operation of the vehicle.
	The "Dynamic Suspension Malfunction" indicator alerts the driver to issues within the vehicle's dynamic suspension system, which controls the ride quality and stability. When illuminated, it indicates potential problems with the system's components or sensors that require inspection and repair.
	The "Suspension State Check" indicator prompts the driver to inspect the vehicle's suspension system for any abnormalities or faults. This warning can cover a range of issues, including worn-out components, fluid leaks, or improper alignment, that require attention to maintain optimal driving performance and safety.
	The "Faulty Oxygen Sensor" indicator signals a malfunction in the vehicle's oxygen sensor, which monitors oxygen levels in the exhaust gases to regulate fuel injection and emissions. If triggered, it suggests that the sensor needs diagnosis and replacement to ensure proper engine performance and emission control.
	The "Electronic Fuel Injection Control System Malfunction" light signals trouble within the electronic system managing fuel delivery to the engine. When this system breaks down, it can lead to poor gas mileage, rough idling, or engine hesitation – so prompt attention is crucial.
	The "Car Electronics Malfunction" indicator warns of issues across various electronic systems in your vehicle. This could mean problems with the entertainment system, climate control, or other electronic components. If illuminated, diagnosis and repair by qualified technicians is necessary.
	The "Variable Gear Ratio Steering System Malfunction" light indicates faults in the system that adjusts steering responsiveness based on driving conditions. When on, it signals potential component or calibration issues requiring inspection and repair.
	For electric vehicles, the "Electric Vehicle System Malfunction" light signals problems with the propulsion system – battery, motor, or control electronics. If it comes on, immediate professional inspection is required to prevent further damage and ensure safe operation.
	The "Electric or Hydraulic Power Steering Malfunction" indicator alerts you to issues with the power steering system. When illuminated, it could mean electric or hydraulic component problems that require inspection and repair to maintain steering functionality.
	The "Convertible Top Power Failure" light alerts you to issues with the convertible top motor, hydraulics, or electrical parts. It means the power-operated convertible top mechanism has a problem and needs repair to work properly again.
	When the "Electric Parking Brake Failure" indicator comes on, it signals a malfunction with the electric parking brake system. This system holds your vehicle in place when parked. The light could mean trouble with the brake actuator, sensors, or control unit. Address this issue quickly to prevent unintended movement.
	The "Immobiliser System Malfunction" indicator warns of problems with the immobiliser system, which prevents unauthorised engine starts. If triggered, it suggests issues with the antenna, immobiliser control module, or key recognition. Diagnosis and repair are needed to operate the vehicle.
	The "Catalytic Converter Malfunction" light indicates potential issues with the catalytic converter, which reduces harmful exhaust emissions. Illumination could mean catalyst degradation, overheating, or other problems. Inspection and replacement may be necessary for emission compliance and engine performance.
	When the "Automatic Transmission Problems" indicator comes on, it alerts you to issues with the automatic transmission system. This could include low oil level or pressure, overheating, or sensor malfunctions. Immediate attention is required to prevent transmission damage and ensure safe operation.
	The "Faulty Parking Sensor System" light warns about issues with sensors that detect obstacles when parking. It means there are sensor problems or dirt buildup. The sensors need cleaning or repair to work properly again.
	The "Night Vision Infrared Sensors Failure" light shows the night vision system isn't working right. This system helps you see better at night. When this indicator comes on, it means the infrared sensors or control module have issues. It needs to be fixed to restore night vision.
	The "Clutch Malfunction" light warns of problems with the clutch system, which engages and disengages the transmission from the engine. When illuminated, it could mean clutch slippage, wear, or hydraulic issues. The clutch needs inspection and repair to ensure proper operation.
	The "Electronic Throttle Valve Failure" light signals problems with the electronic throttle control system, which controls engine air intake. When on, it suggests throttle position sensor, motor, or control module issues. Diagnosis and repair is needed to prevent drivability problems.
	The "Brake System Malfunction" light alerts you to brake system problems. These could be issues with the brake pads, rotors, hydraulic system, or anti-lock braking system (ABS). When this indicator comes on, immediate action is required for safe braking.
	The "Electronic Components of Automatic Transmission Failure" indicator warns the driver of issues with the electronic components of the automatic transmission system. When activated, it indicates potential problems with sensors, solenoids, or control modules, requiring diagnostic assessment and repair.
	The "Pre-collision System Failure" indicator alerts the driver to a malfunction in the vehicle's pre-collision system, which helps prevent accidents by detecting potential collisions and applying brakes or warning the driver. When this light comes on, inspection and repair is needed to restore collision avoidance functionality.
	The "Main Battery or High Voltage Circuit Malfunction" indicator signals issues with the main battery or high voltage circuit in a hybrid or electric vehicle. When illuminated, it indicates potential problems, such as battery degradation, electrical faults, or charging system issues, that require immediate attention to prevent drivability issues or safety hazards.
	The "Four Wheel Active Steering/Rear Active Steering System Malfunction" indicator warns the driver of issues within the vehicle's active steering system, which enhances manoeuvrability and stability. When this light comes on, it indicates potential problems with the system's components or calibration that require inspection and repair.
	The "Exterior Lighting or Electrical Circuit Malfunction" indicator alerts the driver to issues with the vehicle's exterior lighting or electrical circuit. When activated, it suggests problems, such as bulb failure, wiring issues, or electrical faults, that require inspection and repair to maintain visibility and safety.
	The "Coolant Temperature Critical" warning light flashes when the engine coolant gets too hot. This signals potential engine overheating issues. Flickering lights suggest faulty cooling system electronics that should be checked immediately to avoid engine damage.
	The "Engine or Automatic Transmission Malfunction" indicator illuminates for problems with the engine or automatic transmission. It could mean engine misfires, transmission slippage, or emergency shift mode activation. Get it diagnosed and repaired promptly.
	The "Headlamp Self-Levelling System Malfunction" light warns of issues with the headlamp self-levelling system. This system adjusts headlamp aim based on vehicle load and road conditions. When this indicator is on, it suggests potential sensor, actuator, or control module problems. Inspect and repair to maintain proper headlamp alignment.
	The "External Sound System Malfunction" indicator signals problems with the vehicle's external sound system. This system alerts pedestrians to an approaching vehicle. Prompt inspection and repair are crucial for pedestrian safety.
	The "All-Wheel Drive System Failure" light indicates issues with the vehicle's all-wheel drive system. This system distributes power to all four wheels for enhanced traction. Immediate attention is required to restore AWD functionality.
	The "Blind Spot Monitoring System Malfunction" indicator alerts the driver to problems with the blind spot monitoring system, which helps detect vehicles in the driver's blind spots. Prompt repair is necessary for driving safety.
	The "Faulty Airbags" light alerts the driver about issues with the airbag system. Airbags deploy during crashes to protect people inside the vehicle. Getting it checked and fixed right away ensures airbags work properly.
	The "Engine Issues" warning indicates problems with engine-related parts like the ignition, fuel injection, or emissions control systems. Addressing these problems promptly prevents drivability issues.
	The "Stability/Brake Assist Malfunction" indicator signals problems with systems that help control the vehicle during turns and hard braking. Immediate attention is needed for safe driving.